Looking Good

A long week and the weekend couldn’t get here fast enough so I can get down to Mustang Maniac. I arrived with change of clothes and a packed lunch. The dogs were in high spirits and enjoying the sun running around the now spacious yard. Adam looked over the car with me and gave me my instructions for the day. Final clean up of the left side and remove the shock tower bracket that had been badly welded on. I wanted to replace the brakes with a nice smart export brace so they needed to come of anyway. I have seen some were the export brace sits over the top of the brackets and it looks a poor job. So while I was at this stage it was an ideal time to remove the first one. It was a case of the angle grinder to reduce the weld to as thin as possible then lever the old bracket off the shock tower. With the bracket off I was able to grind down the weld almost flat. I have become a lot better at using the angle grinder with finesse and can grind away quite accurately now with only the bits I want removed.

Bracket in place

Bracket removed to leave the old welds

Cleaning up the metal to make sure no rust was about and wire wool the tight spaces to leave a fresh bare surface.

With my ears still ringing from the whine of the angle grinder it was time for some peace and quiet and start the stipple of the red oxide. This was to continue to edges where I didn’t need welding and again stop about an inch in to allow welding to be done. Of course there will be some bits that I may have to go over again when the repair welds start, but that can’t be helped. I completed the complete left hand side inner fenders and the fire wall now. Adam came to give me a hand a little later so we could roll the car over ready for next week’s more of the same all be it on he other side. What a difference it makes to see the red oxide on there. The pictures here were taken as soon as I had finished, so it was a little wet in some places.

Sunday the wife wanted me to give her a hand with the garden as she wanted to get our lovely bamboos out the garden, as they were start in to go a bit mental. I came home Saturday evening to find the big bushes cut down but the stumps or shoots still in the ground. The ground was soaked by the rain in the morning so it wasn’t to bad to dig. What I wasn’t expecting was the shoots to travel as far sideways as they did. Under the loose laid patio in the corner, and to the fences. We lifted the slabs up to find a find a complex web of infiltration from the roots that was more complex than a cold war spy drama, it was everywhere. We eventually got it all up but it was a pain. Tip: Don’t plant bamboo in the ground unless you have a couple of giant pandas coming to stay to keep it under control.

In case you are wondering, I did manage to sneak a couple of hours in at the man cave while she was out. I started to clean up and strip down down the steering setup. But shoosh, don’t tell the wife! I will create a step by step process and add it soon. I can’t do a Sunday without a little tinkering on the car or car bits now can I?