A big day for me had arrived early on Friday morning, I had taken the day of work and just for once the Friday alarm woke me up and I was in a good mood. The day trip was a visit to go and see the guys at Meguiar’s for a ‘Day In The Bay’. I had been emailing Dale much earlier in the year and we arranged a date for me to attend on the 29th March. Before we start, and you make any assumptions, this is not a sponsored post by Meguiar’s. This is a genuine member of the public’s personal opinion. It’s no secret that I am a fan of Meguiar’s products. I have used other brands to try them out, but I always seem to come back to Meguiar’s.
The journey up to Davenport was little over one hundred miles away, my sat nav told me that it would take a little over two hours to get there. I set of at seven in order to get there for ten as arranged. The extra time contingency was for road works on the A14, it was just as well as I got held up in them, but at least I was moving, all be it slowly. The funny thing that I saw was a sign that said, “a lot of work is out of sight”, it probably is, they were hard at work making tea, sitting on their backsides reading the paper, or posting on Facebook instead of building the roads to minimise the carnage to the motorist. (rant over).
I arrived at a quarter to ten and parked up. The whole place was buzzing as there was deliveries being made and the forecourt had lots of products on pallets awaiting their delivery and stock allocation.
I buzzed into the main offices where I asked to see Dale, he in turn was then called. Within a few seconds Dale greeted me, then if summoned by some divine intervention the local mobile coffee guy arrived and Dale asked if he could get me a tea, coffee or cold drink.
With the refreshments out the way Patrick arrived as he was going to do the video and camera work for the day. This was also going to be an instructional video to go on their YouTube channel shortly. (I will place the links at the end of the post). Like all good trainers I was asked what I wanted from the day what could they do for me. No scripted you must do this, you must do that scenario. My response was that I wanted to know how to use their products correctly and for tips and tricks with my paintwork and wheels. We had a look around the car and I pointed out some ‘pig tail’ marks that were on the hood from a previous mop a long time ago. There was some minor swirls that I wanted to address as well. Dale looked at the paint work intently, listened to what I was saying and recommended their Mirror Bright range for the colour of my car, and particular paint.
Next was the worst nightmare for a classic car owner, water. Again I was asked if that was going to be OK before they started. As it was a beautiful day, sun was out and it was warm I agreed, the mandatory two bucket wash method was given the go ahead. The jet wash came out and the buckets were being filled.
For the next stage I was going to be very much hands on with the training and I didn’t get much chance to pick my phone up for some photo’s. Although I know Patrick was taking plenty as we went along.
We rinsed the car over with the jet wash to wet it over and remove the worst of the road grime.
The wheels were sprayed with the Mirror Bright wheel cleaner. The mix is left on for a minute or so to see if it changes to purple. Once the product has done its job rinse of with a gentle jet wash.
Tip: Use the jet wash at a forty five degree angle to the paintwork. The reasoning being that you are not blasting water directly into and stone chips.
Tip: Fill the wash bucket with warm water and the rinse bucket with cold. This way you can feel which bucket is wash or rinse when they both have foam on the top.
Using a soft wash mitt like the lambs wool mitt to gently wash over the paint with the product allowing the shampoo to do the work.
The car was dried with the new Meguiar’s supreme drying towel. After we had dried the car I was directed into the Detailing Bay, or as Dale described it; ‘the tunnel of doom’. When I asked why, he switched the high intensity lights on, then I realised why. I could see things I hadn’t noticed before in the paintwork. Every minute imperfection was holding a sign up saying look at me.
The main issue was to address the pigtails in the paint I mentioned earlier to Dale. Patrick was filming Dale explaining the process of what he was going to do. He showed me how to use the Dual Action (DA) MT320 correctly. I was shown how to prep the rotary pad, how to prime the pad before using it, and how much product to use. A common mistake by not priming the pad prior to the application of the products. The hood was sectioned into four smaller workable areas. Dale did one side and I did the other with him giving me guidance. Patrick was getting some close up action shots as we were going along.
With the hood corrected and cleaned it was now looking smooth and flat. Again I was asked my preference for wax type, so I said it has to be the hand applied hard wax rather than the liquid form. Dale then started on the application of the Mirror Bright hard wax paste, I wasn’t sure about the results I would get as I was expecting results like the Ultimate wax for my preferred results that I liked. My expectations were surpassed, Dale was right, this wax suited my car.
Tip: Pinch the top of the applicator pad and place flat onto the wax, twist half a turn and that will be enough for a complete panel.
Tip: A small overlapping circle with fingertip pressure is all you need.
It soon became pretty clear that I was using the wax quantities all wrong in the past, using way to much product.
Once the wax had cured it was a simple wipe of a microfibre was all it took to bring the shine out. The wax came straight off. No buffing, no elbow grease required. Just like dusting a car over in fact.
Tip: check the wax has cured by wiping it with your finger. If it leaves a clean mark behind then it’s ready to come off. If it has a greasy smear behind it, leave it little longer and check again.
Tip: With the car freshly waxed, use a light misting of quick detailer. This will stick to any left over wax that hasn’t been removed leaving a pristine slick paint job.
With the car buffed over I stood in amazement as the car looked as good as it did the day it was painted and still wet.
I drove the car outside and the sun made the car transformed yet again in natural sunlight.
As the Meguiar’s warehouse were still taking out and receiving orders, I had to move the car out of the road after the main pictures were taken, the lorry driver even jumped down from his cab and joined in for a chat too. As Patrick was using the professional camera, I let him do his thing and I kept out the way.
With the photo shoot completed I asked Dale and Patrick for a picture of them with the car. Dale in black and Patrick with the stripped top.
I would like to say to Meguiar’s, especially Dale & Patrick who looked after me;
Thank You So Much!
I had the best day ever cleaning a car, and nothing was to much trouble for these guys. They answered my endless barrage of questions, they also showed me the answers too. In fact everybody I spoke to there was amazing.
There was only one thing left to do, purchase some goods. I didn’t have to at all and they never tried to sell me anything. However I needed a bag that could hold the largest of Meguiar’s bottles, so I grabbed their brand new to the market Extra Large Kit bag, which is huge. The other products are what I used on the day, but I hadn’t got in my arsenal of detailing products. The Ceramic Wax I am very intrigued about and wanted to try.
However, once I got the car home I had to give it a gentle clean before I covered it up in the garage.
Patrick is going to be uploading a video of the day to the Meguiar’s YouTube channel:
Check out the ‘Detailing 101’ where they show you how to use the products, it’s very useful.
The products I used for the day were all Mirror Bright except for the Meguiar’s Compound stage of the hood treatment. Again, I am gaining nothing from showing you what I used, but if you want some amazing results try these. I will be doing some reviews of the products a little later on of course. But, I can say one thing, they will get scores.
All of the products can be found here: https://www.meguiars.com/mirror-bright
Patrick has said that they will be sending me the high resolution photos of the day, which I am so looking forward to getting hold of. I will then do a follow up post of some proper photos taken on the day.
Later that evening on social media platforms I spotted these posts:
Yes that is me with the polisher!
Be sure to follow ‘Mequiarsuk’ on Instagram to see their latest posts or follow ‘dale_mast’ himself who really does know what he is talking about.