fire extinguisher – One Man And His Mustang

I have to confess that I scheduled a Merry Christmas and a Happy New Year post to be scheduled for the relevant big day so I didn’t forget. But, as I kept thinking 2018 to myself in my mind so that I didn’t make a mistake as I was scheduling the post, the opposite happened and I actually set the year for 2019 thinking that was in fact the next year. So my resolution for this year is; learn how to work the calendar function on WordPress. I appologise for that.

Resolution completed! Apparently I just have to put the correct year, simple really. Obviously not for a doughnut like me though! So I had time off over the Christmas break and went back to work on the Tuesday as did most people and by the afternoon I had filtered out the emails and got myself back to where I needed to be – thinking that I needed a holiday and asking myself; just where did the time go?

For christmas my wife spoilt me rotten and bought me a vast array of lotions and potions for the cleaning and maintaining of the Mustang. The selection was taken from a list that I had made for her in order to pick something from it. As she didn’t know which one to get so she bought them all, as well as an Auto Finesse Crew Bag to fit them all in. I must say that the “Crew Bag” is like a black hole with handles, it has so much storage space and easily the best bag I have, and I have a few now, trust me.

I will be reviewing them once I get to use them on here under my “Car Detailing Reviews” menu above. However the biggest surprise was the fact that my better half had listened to a conversation I was having with some retailers here in the UK for a classic looking fire extinguisher. Not any old fire extinguisher, oh no. I wanted one that looked old school but also did the job without additional damage. CO2 extinguishers can freeze electrical components with thermal shock, powder gets everywhere and creates a huge mess, water you can’t use on flammable liquids etc. So over the later part of the year I had been doing my homework. The best seemed to be HalGuard which is made in the USA, unfortunately not readily available over here in the UK. If anybody knows any different can they please let me know? Some of the benefits of this fire extinguisher are; no thermal shock, liquified gas gets to hard to reach places, no mess, rechargeable, recommended by aviation and many motor sports governing bodies, five-year warranty, oh it also comes in chrome! Nobody in the UK stocks or makes anything similar that has such good ratings or looks remotely like it should be from the ’60s. In the end, due to costs, I had all but given up on the idea. My wife had other ideas and picked up where I left off and ordered one from the USA. Inevitably there were all sorts of issues trying to get it past our wonderful HMRC customs people who obviously had nothing better to do other than check on fire extinguishers, maybe the could concnetrate on illegal immigrants a bit more like the ones hiding in the back of lorries maybe? Anyway, import duty, standard charges, handling fees etc. were a joke which added significant costs to the item. They had it impounded for a couple of weeks before they eventually released it to my wife mid December, by which time she was starting to panic a little. But, she got it and all credit to her. Once I had opened it and I asked “how?” I was told all about the horror story and the customs episodes.

Between Christmas day and the New Year’s day I wanted to fit it. There are additional brackets you can buy like, roll over cage mounts, under seat, quick release flat mounting etc. I already had an idea where it was to go; in the footwell on the passenger side. I waited for a clear dry day and got my car out into the cold air where I started to look for the best place to mount the new (essential) accessory.

The extinguisher needed to be off the floor, but low enough for the fresh air vent door to be fully opened just under the dash. The kick panel is made of a fairly thick plastic and the bracket has lots of holes for various mounting positions. I decided to use them all in order to spread the weight of the extinguisher so the screws don’t pull out of the plastic or distort it. Using the larger slot I held the bracket in place while I finalised the position and made sure it was straight.

The Dremel was the tool of choice as it was small and neat in order to create a small pilot hole ready for the screws, two larger style ones at the top that are also polished which would be seen, the remaining screws were smaller headed ones also polished. Once the holes were marked up I could fit the bracket properly.

The extinguisher was put into place and the belt clamped up then I took a step back to admire a fire extinguisher that I think looks good and will do the job should I ever need it, which I hope I never will.

The car was cleaned up, the mat was put back down and then I polished the chrome extinguisher to remove any finger marks and refitted it. I think the look goes well with the car, it can be easily accessed, it’s easily seen from outside and I can relax a little when I’m out on the road now.