Each year I try and create a little Christmas message with my car as the centre point. It takes a little while to mess around in Photoshop, but I think they look OK for an amateur. This year I have tried something a little different with varying results using the big buzz term ‘AI’ or ‘Artificial Intelligence’. The images were created pretty quickly – around 20 seconds or so on average across the various websites.
I visited quite a few sites by the end of the session, some sites required you to create an account which was rather annoying while others were free with adverts. Some were just so confusing I didn’t bother continuing with them. Each site had the same copy and pasted instructions, ‘Christmas scene with 1966 Ford Mustang blue coupe’. Looking closely at the images there was a theme of the ’65 grill bars for the Coral. Some of the Coral horses were a bit strange, but acceptable.
The winner I chose was this one, I only added the text at the top. It meet with my expectations of a Christmas scene and a car, it just looked festive. The only issues (apart from the scale of the car) that I spotted was the ’65 grill bars and the ‘F O R D’ on the hood had an extra letter!
This runner up was a very good image apart from ‘Christmas’ wording being repeated. The grill had a single spot light, extra hood letter and what looks like ’65 quarter emblems. Without the extra light and wording this could have been the winner.
For third place this image had very good rendering. I was particularly impressed with the reflection of the tree in the paintwork, and it just didn’t look like an after thought pasted into the image.
In fourth place, I’m not sure what lettering was on the hood, but I think it might say ‘Lincoln’. This was a great render, but it just looked like a car had been pasted onto the background, I still liked it though!
Then we have this, which wasn’t too bad for a cartoon style (I think), but it has been chopped off at each end.
Not sure what this effort was all about! Half fastback with dodgy rear quarter lights and no hint of Christmas.
I don’t think the Ford stylists have much to worry about with this ‘Coupeback‘ design. Have I just made up a new word up in the Mustang community! Has it been used before, although I haven’t seen it anywhere.
All these AI images are heavily dependant on what you put in as a prompt, what style of image you select can have a significant affect on the results. Adding extra words like, snow, no red tyres, or decorate the Christmas tree helped improve the images. I spent far to much time playing around with the many excellent variables. I had a bit of fun laughing at some of the results, then on the other hand some were pretty impressive. Where will all this go in the future? I don’t know, but one thing is for sure – it’s here to stay and it will get better!
Do you ever worry about the safety of your classic cars? With car thefts on the rise, if not for the car then for the hard to get parts. Either way it’s more important than ever to take precautions to protect your vehicle. In this article, we will discuss the use of GPS trackers for car security, a modern solution to this growing problem. Through innovative technology and real-time tracking, you can have peace of mind knowing your classic car is safe and secure.
Using GPS trackers is a wise decision to protect your vehicle from theft. These devices use satellite technology to track the location of your car in real time. They can be discreetly installed and provide peace of mind knowing that you can monitor your car’s whereabouts at all times.
A pro tip for GPS tracker users is to choose a device with geofencing capabilities. This feature allows you to set virtual boundaries for your car, and if it crosses those boundaries, you will receive an immediate alert. This can help prevent unauthorized usage or theft of your vehicle. Stay one step ahead with GPS trackers for car security.
How GPS Trackers Can Improve Car Security
GPS trackers offer a variety of benefits for enhancing car security. To make the most of your GPS tracker, follow these steps:
Activate the tracker and ensure it is properly connected to a tracking service.
Monitor your vehicle’s location and receive real-time updates through a mobile app or web interface.
Set up geofencing alerts to receive notifications if your vehicle enters or exits specific areas.
Take advantage of additional features such as remote engine immobilization to prevent unauthorized use.
In addition to these steps, here are some suggestions to maximize car security:
Regularly check the tracker’s battery life and ensure it is functioning correctly.
Notify law enforcement immediately if your vehicle is stolen and provide them with the GPS tracking information.
Consider adding additional security measures like steering wheel locks or alarm systems.
Inform your insurance provider about the GPS tracker, as it may result in lower premiums.
Types of GPS Trackers for Cars
There are various types of GPS trackers available for cars, each with its unique features and benefits. Here is a table outlining some of the most common types:
Type
Features
Benefits
Examples
Plug-and-Play
Easy installation, portable
Convenient for temporary use, can be transferred between vehicles
OBD-II
Plugs into the vehicle’s OBD-II port
Provides real-time data, such as speed and engine diagnostics
Hardwired
Connected directly to the vehicle’s power source
Hidden installation, no need to worry about battery life
Covert
Discreet design, difficult to detect
Ideal for covert surveillance or anti-theft purposes
Pro-tip: When selecting a GPS tracker for your car, consider your specific needs, such as ease of installation, real-time tracking capabilities, and level of discretion required.
Choosing the Right GPS Tracker for your car
There are many various options out there for trackers, from the simple magnetic stick under the car, OBD or a hard wired options to choose from. Price point and ease of use is a consideration, some portable or covert options are similar costs to hard wired counterparts, but these portable iterations can be more versatile in multiple usage scenarios.
Choosing the right GPS tracker for your car is crucial for ensuring its security. Here are some steps to help you make an informed decision:
Assess your needs: Determine why you need a GPS tracker, whether it’s for theft prevention, monitoring teenage drivers, or for a commercial fleet management where various options are available.
Research different options: Look for GPS trackers with features that align with your needs, such as real-time tracking, geofencing, and compatibility with mobile apps.
Consider installation: Decide whether you want a wired or wireless tracker and if you’re comfortable with DIY installation or prefer professional assistance.
Check compatibility: Ensure the GPS tracker is compatible with your car’s make and model, and check for any additional requirements.
Compare pricing and subscription plans: Compare the cost of the tracker itself, along with any monthly or annual subscription fees, to find the most cost-effective option.
Read reviews: Look for user reviews and ratings to gain insights into the reliability, accuracy, and customer support of different GPS tracker brands.
Consider additional features: Some GPS trackers offer extras like SOS buttons, battery life indicators, or tamper alerts. Consider these features if they’re important to you.
Tips for Getting the Most Out of Your Car GPS Tracker
To ensure the optimal performance of your car GPS tracker, follow these steps:
Select a reputable GPS tracker brand such as Family1st, Vyncs, or Bouncie.
Conceal the tracker in a secure location within your vehicle.
Ensure the tracker is properly connected to a reliable power source.
Activate the tracker and adjust any necessary settings.
Regularly update the tracker’s firmware and software for the best results.
Set up geofencing to receive alerts if your vehicle enters or exits a designated area.
Monitor the tracker’s location and activity through a secure online platform or mobile app.
Keep the tracker hidden and secure to prevent tampering or theft.
Regularly review and analyse tracking data to identify any suspicious or unauthorized activity.
Contact the relevant authorities if your vehicle is stolen or if you suspect any foul play.
Conclusion
It’s worth considering that some trackers can be fitted by yourself as mini project, where as others may need professional installation. If you have just a plug in or battery powered attached module, then they could be easily disabled and removed once found, but they will provide a level of protection. The key to these devices is to hide them well and make sure they are secured from falling from the vehicle. Keep a regular check on their battery levels. Most hard wired trackers have a built in battery back up which is should be a strong consideration when buying an installation style tracker. If the main battery power supply for the vehicle is disconnected, then this style of tracker will still send location updates which can be crucial if the vehicle is moved even after power any power disconnection. Older vehicles don’t use OBD sockets so that is a limitation to consider. Some owners do not want to make a permanent change to the vehicles wiring, so a simple plug in or hidden portable device is the answer.
Using GPS trackers for car security has become increasingly popular due to their effectiveness in preventing theft and providing real-time tracking. However, it is important to choose a reliable tracker and ensure proper installation. Some top-rated GPS trackers include Family1st and Optimus 2.0.
Additionally, it is recommended to regularly update the tracker’s software and secure it with a strong password. Lastly, always remember to inform your insurance company about the installation of a GPS tracker, as it may qualify you for insurance discounts. Stay vigilant and protect your vehicle with a reliable GPS tracker.
Some trackers only need a live feed and an earth to function, these can be hidden without having to worry about charging the portable device styles.
Frequently Asked Questions (FAQs)
1. How does a GPS tracker work for car security?
– GPS trackers use satellite technology to pinpoint the real-time location of your vehicle. Once installed, they communicate with satellites to provide accurate and up-to-date tracking information through a secure online platform or mobile app.
2. Can GPS trackers be easily detected and disabled by thieves?
– Modern GPS trackers, especially covert models, are designed to be discreet and challenging to detect. Additionally, many trackers have anti-tamper features to prevent easy removal. However, it’s essential to choose a high-quality, well-reviewed tracker and keep its location confidential.
3. Do GPS trackers drain my car’s battery?
– Most GPS trackers have minimal power consumption and are designed to operate efficiently without significantly draining your car’s battery. It’s advisable to choose a tracker with low power consumption and monitor its battery life regularly.
4. Can I use a GPS tracker for multiple vehicles?
– Some GPS trackers, especially plug-and-play models, are portable and can be transferred between vehicles. However, it’s crucial to check the specific features and compatibility of the tracker to ensure it meets your requirements for multiple vehicles.
5. Will using a GPS tracker affect my car’s warranty?
– In most cases, using a GPS tracker will not void your car’s warranty. GPS trackers are typically non-intrusive and do not interfere with the vehicle’s essential systems. However, it’s recommended to check your car’s warranty terms or consult with the manufacturer for confirmation.
6. How can geofencing enhance car security?
– Geofencing allows you to set virtual boundaries for your vehicle. If your car enters or exits these predefined areas, you receive immediate alerts. This feature is valuable for preventing unauthorized use or theft, providing an extra layer of security.
7. Are GPS trackers visible to potential thieves?
– Many GPS trackers are designed to be discreet and hidden within the vehicle. Covert models, in particular, are challenging to detect. However, it’s essential to follow the installation instructions carefully to ensure effective concealment.
8. Will a GPS tracker lower my insurance premiums?
– Informing your insurance provider about the installation of a GPS tracker may qualify you for lower premiums. Many insurance companies view GPS trackers as a proactive measure for theft prevention, reducing the risk of vehicle loss.
9. Can I track my vehicle in real-time using a mobile app?
– Yes, most GPS trackers offer real-time tracking through mobile apps or web interfaces. This allows you to monitor your vehicle’s location, receive instant alerts, and access historical tracking data for added security and peace of mind.
10. What should I do if my GPS tracker indicates suspicious activity or my car is stolen?
– In the event of suspicious activity or theft, contact law enforcement immediately and provide them with the GPS tracking information. Prompt action increases the chances of recovering your vehicle.
Hope that helps a little over the winter months a mini project of a simple Christmas gift could be peace of mind!
I have been known to collect many things Mustang related, but I try to keep the collection to the tasteful items. I draw the line at such things like Mustang trainers, soft cushions, bedding sets, teddy bears, aftershave, Zippo lighters etc. as they are all just seem to be cashing in on the Mustang name. I like to collect things that are an of historical importance from the first generation of Mustangs, 1964 – 1966. Some of those items have been historical documents for the 1964 World Trade Fair Mustang launch, Newsweek, Time and Life, along with various other popular car magazines that covered the Mustang launch, test drives or articles at the time. I also managed to grab some items like original sales brochures, promotional literature and such like, which ended up in my collection. As many of the items I have are paper they tend not to stand the test of time unless looked after. Most magazines like Newsweek were just thrown away, making survivors of the time in good condition had to find. I collect these sort of items for their importance and not the monitory resale value trying to make a quick buck. I don’t keep them for a while and then sell the items on as an investment. I won’t part with anything I have, or sell it on for a profit. I have been given many rare items over the years which started my collection off – a special thanks to Gary W. who is also a big collector. It was Gary that started me on this slippery slope of emptying my wallet on a regular occasion.
I have added just added a couple of more items to my collection, which I have been looking at for a while now and wanted good condition ones. There isn’t much known about these items in descriptive detail so I wanted to put that right. I have spent a fair bit of time researching and also created a page dedicated to them here which I hope to add to as time goes along.
As I will add more posts to this website, then this article will be gradually pushed down the order. So having a permalink in the menu will help keep the information to hand and hopefully help out others.
So, what am I talking about? The answer is; ‘dealership model’ cars.
These models are something that were official promotional items made for Ford for their various in production and future production line cars as they changed the real car designs. These models therefore served an important purpose. I suspect many of these models were thrown away after a couple of years or given to children as toys to take part in some fantasy destruction derby with other toys, many of which ended up in the great (plastic) scrap yard in the sky.
The background to these models is that various forms of these promotional models started to appear at motoring dealership around the 1950s from various suppliers. These ‘dealership’ models as they became to be known are certainly not to be confused with the component model kits which were built and stuck together, like Airfix, Tamiya or Revell. These dealership models were prefabricated and distributed to the motor company dealerships. They were to promote and give a three dimensional representation of the new models that were being introduced by the various manufacturers. This gave the potential customer a much better experience of what they are going to buy, rather than just flicking through a printed catalogue. With these dealership models you got to appreciate the dimensions of the car from any angle.
I will try to sum up the information that is out there from the likes of Wikipedia and other collectable model based sites, concentrating on the dealership cars side of the AMT business.
What we do know is that these quite fragile models are highly collectable as memorabilia especially for important cars from the manufacturers, not just Ford. As for the numbers actually produced I haven’t been able to quantify, but they limited in number and not a mass produced item. The actual numbers produced will obviously vary from various motor manufacturers, and the number of dealers actually selling the cars of course. These models were not for commercial retail, they were just a promotional item that was going to binned when that model is no longer produced. Many of these model cars that appear for sale now days are pretty battered. However over time they have become recognised to be for what they are now, collectable items from a bygone era.
The costs for these models production has been reported at the time as anything between $50,000 ($650,000 in todays money), to $250,000 ($3,000,000 in todays money). Either way that is not an insignificant amount of money for a launch of a car with no idea of how it will actually sell, thus recoup some of the promotional money back at the time. A big advantage that Ford had was on 17th April 1964 at the New York World’s Trade Fair, the Mustang was launched to the public to critical acclaim. This was backed up by selling over 680,000 Mustangs in the first year, which is still a record. With that type of response Ford felt the investment would be worthwhile as they couldn’t make the cars quick enough for the public to buy them, with some dealers having lengthy waiting lists. Having an accurate model of the car that could be seen by the customer was a huge bonus at the time.
The History of AMT
In 1948 a company called ‘AMT’ was started up by West Gallogly Sr. in Troy, Michigan USA. ‘Aluminium Model Toys’ was created as a secondary business by Mr. Gallogly. Other manufacturers were already creating dealer models which were mostly zinc based. Gallogly also wanted to make the models out of aluminium, hence the name ‘Aluminium Model Toys’ was given to the company. However, very shortly after the name was chosen, the use of plastics materials rocketed around the world and the name Aluminium Model Toys deemed to be confusing for their plastic models, thus the name was rebranded to a shortened version of the name, ‘AMT’. In 1978 AMT was bought out by Lesney better know for ‘Matchbox Toys’. In 1983 Lesney relocated to Baltimore and sold the AMT company to ERTL, which was then to be known as AMT-ERTL. Later in 2007 the AMT name was no more and the company name was now just ERTL.
In 1958 AMT were producing ‘3 in 1’ kits which allowed three different version of model which could be made; ‘Stock’, ‘Custom’ or ‘Racing’ with numbered decals.
In 1962 AMT were also involved with ‘Slot Car’ industry which started in 1912 which is still hugely popular today. They manufactured various sizes of car such as 1:24, 1:25 and 1:32. The 1:32 scale was adopted as the standard by Scalextric for fun racing at home or the more serious competitive racing scene.
In the mid 60’s Mr. Gallogly went on to use his good connections with the Ford Motor Company to manufacture some highly detailed promotional models for them. What was said, who agreed it and what the actual deals that were struck at the time during those meetings is unclear. But, it must have been pretty good for the Ford Motor Company executives agreeing to the Dealership Promotional Models.
It was recognised during that golden era for the motor manufacturing industry, it was deemed the norm for a new model to be produced every year or two years max. To make people aware of the new vehicle designs which were in coming and in production, these promotional models were distributed to the dealers, often well before the actual cars arrived for demonstration cars or actual stock of cars for sale.
Sadly towards the late 1960’s and certainly before 1970s the dealer models were not a thing anymore and all but faded out from being produced and no longer sat proudly on a salesman’s desk.
The Mustang Models
Focusing on the first generation 1965 models as those are the ones I have. These models are extremely well detailed, and they were supposed to have been made with the colours that the manufacturers were painting their cars at the time. The colours I have appear to be ‘Rangoon Red’ and ‘Wimbledon White’.
Dimensions
The models are manufactured to the scale of 1:25, that converts to a measurement on model of 1cm will convert to 25cm on the real thing.
Photographing the dimensions against a tape measure is a little distorted perspective by the camera, so I have taken a few variations. But, the stated measurements are correct with the photo taken directly above the line of sight to the tape measure.
The length of the models are 183mm long or 7.20 inches or 7 3/16″
The Width of the models are 70mm or 2.75 inches or 2 3/4″
The Height of the models are 50mm or 1.96 inches or 1 31/32″
The whole model weighs in at just 105grams or 3.7oz
Construction
The construction is very fragile and light weight brittle plastic which is easily marked or dented especially on the leading edge of the hood which narrows to almost nothing.
The single piece floor pan forms details of the underside of the car, suspension, engine, gearbox, all the jig points, grommets, bolts, fuel tank, brake lines for the emergency brake cable, and a single exhaust system which comes from a V8 (I will elaborate on this below under The Details heading), as there are two exhaust manifold pipes, going to a single pipe, and on to a single muffler box. There are four screws in total two at each end that hold the model together. The exhaust tip is missing on the right side (passenger) as the one of the screw points cuts it off.
The other side (inside) of the floor pan forms the seats, dash area and centre console (which would have been an optional extra at the time).
The steering wheel and column looks to be a separate moulding attached to the dash. The interior detailing shows the heater controls, radio, lateral dash instruments, glove box, steering horn and even the markings for the automatic gearbox box selector, but there is no T Handle for the shifter or indicator stalk. Both of which I suspect would have been so delicate they would have broken being removed from the moulds or from just being handled. Looking in the footwell there is a third pedal for the clutch, this would be a contradiction for the automatic gearbox markings. The door cards look to be the ‘Pony’ interior or deluxe option, but there is no running horse embossed on the back of the seats, which are part of the ‘Pony’ interior package. The front seats are the bucket style and not the rarer bench seat option (around 2.5% of total Mustangs made) which was available at the time.
The four wheels are attached to a bar rested in locators on the floor pan mould (unseen) and spin freely. The wheels are shown with the hub caps and white wall tyres which also show some details as radial grooved. The hub caps will cover the wheels bolts, which would have been four lugs for the inline six cylinder or five lugs for the v8s.
The ‘glass’ or windscreen is a single moulded part which covers the front screen, the two small door quarter lights and the rear screen. It’s not uncommon to see one or both of the door quarter lights broken as they are quite fragile. The clear plastic is susceptible to easy scratches and marking. If you look on the inside (below) where the headliner would have been, you can see where the clear plastic has been attached to the top part of the model. You can’t quite see it on the picture, but the centre of the ‘glass’ is missing, obviously to save some costs on the clear plastic used.
The Details
The chromed parts of the models such as the bumpers, bumper overriders (front and rear), headlights, rear light bezels and grill are high quality with a good reflection, not just cheaper silver paint. These look to be separate components attached after the assembled model. On my models the red car has a little wear and tear on the hood leading edge. I suspect that picking them up and putting them back on the salesman’s desk a few times would contribute to that, or being raced around the furniture at home.
Starting at the front there are the headlights and the cross bar coral grill, the grill itself shows a honeycombed effect. The Coral and Pony logo are crisp mouldings. The licence plate just shows the Mustang brand. The hood leading edge shows the ‘F O R D’ lettering but not in chrome.
The side of the car shows the Mustang ‘Tribar’ emblems and ‘Mustang’ font wording behind the front wheels near the bottom. On the actual cars there is an engine option emblem that sits above the front bumper and below the waist line of the car, a few inches back from the headlight. These models don’t have those emblems, even though the underside of the model shows a v8 engine in place. The options would show, 289 (v8 option), 200 sprint (inline 6 cylinder) or HiPo for the GT model etc. Not having individual models made just for a i6 or v8 and more generic would keep the costs down for the models.
The rear quarter panel ornaments are shown as well as the side rocker cover strips, added as an optional extra at the time. The back of the car shows the rear light bezels with red plastic for the lenses. There are also back up lamps which were also an optional extra. The bumper has the overriders shown, but on my red model they are broken off, a common casualty on these models. This is the only part of the red model that has something broken or missing. The rear licence plate shows the Mustang branding.
The top down view of the models shows the cowl grill and the wipers. There are no door rear view mirrors on these models, as they were an optional extra at the time fitted by the dealers.
Other Dealer Models
Other colours were made such as Tropical Turquoise (top), Vintage Burgundy Red (middle), and American Blue (bottom). There may have been other colours, but as yet I haven’t seen them, which doesn’t mean they don’t exist.
There were some Fastback models made a little later on in the ’65, other colours are unknown.
The holy grail for many collectors would be the boxes that these models came in, they weren’t any special to look at. I haven’t seen any boxed versions up for sale yet, but I did find this image of one. With the box the models are worth a little more, but as with all things collectable, condition is everything.
SomeLater YearModels
1966
There was the trim changes notably to the front grill with the Coral bars removed, the grill now having brushed leading edge horizontal lines. The rear quarter panel ornaments updated to the three pronged style. This model looks to have been in Calypso Coral colour.
1967 – 1968
There was a major body redesign, with the models being Fastback, and not the Coupe style. The minor difference between the ’67 and ’68 were the side markers, which were not shown on these models.
(This image I found of a ’67 shows a broken front bumper.)
1969
This model is showing the performance end of the range. These models didn’t show any emblems on the front fenders that would have been there.
There was another face lift for the 1970 models. But, as I mentioned earlier, by then these plastic dealership models were no longer being made.
On Display
I purchased a display case (more details on that on the main page), for the models to be stored safely and away from dust.
I’m not sure I have covered everything or missed some important facts out. So if you have any additional information or maybe correct me, then please drop me an email, or add a comment and let me know. I will then update with additional information.
I’m always on the look out for any similar memorabilia with a certain online auction site being my main source. If you have anything interesting you may wish to pass on, then please also let me know and I will obviously pay for it along shipping costs.
Now we are at the end of the car show season it’s time to put my pride and joy away and tuck her up for the winter. This is more important than the hotter climates like the USA or Europe. The point is that when you pull the car back out again the car has been as protected as it possibly could have been. I have been asked a few times what my process is over the winter.
One of the most important things I do is to make sure the car is running on fumes. This is due to the fact that the ethanol fuels will ‘go off’ after a few months as it absorbs the moisture from the air. My car tends to run like a bag of nails when the car starts if it has fuel that has been standing. It seems that my carb settings and timings are sensitive to bad fuel, as a result I only use Shell V-Power premium fuel. It’s more expensive but the car does run so much better for it. I do have a five gallon jerry can that I fill up with fresh fuel when I need to move the car again for the first time in the new year.
The classic Mustangs have a lot of chrome and unless protected that chrome could start to pit, usually down to moisture and humidity. I have in my garage a dehumidifier and a radiator with an independent thermostat which keeps the chill away from the garage. The theory is that the car never goes below freezing. I have written an article about humidity and car storage here.
The thing to consider is the environment where the car is to be stored. A decent amount of dry air circulation around the car, and in an ideal situation not standing on a cold concrete floor as this will cause damp issues rising up to the car. I have laid some heavy plastic tiles which insulates the cold floor and the car which I also wrote about here.
First and most obvious is to wash the car, but make sure it’s thoroughly dry, especially if you don’t have a dehumidifier before you put the car away. Use a dedicated car blower if you can rather than a drying towel.
I then wax the car with a longevity wax rather than a show car wax. This will form a micro barrier to the elements, not that it should be needed in a climate controlled environment. It doesn’t matter what wax you use just something to protect it. I used Chemical Guys Quick Detailer P40 this year as the car had a wax a couple of weeks ago. So this was a top up more than anything as this product has a level of carnauba wax as well.
The big piece of work is the wheels. These wheels are chrome and need proper protection. I always clean them and apply a wheel wax during the car show season. But over the winter there is a little process I follow. I clean the tyres and the chrome as normal then I apply a squirt of Gibbs directly into the join of the wheel at the top and allow it run down to the bottom where it will puddle. WD40 or similar will do the same thing. You want enough to penetrate into the gap all the way round but not wate it so it runs out. Don’t wipe it away, just soak up the excess as it pools at the bottom. You won’t be able to get the wax right where you want it, so a penetrating product will get where you cant.
With the excess spray wiped away it was time to protect the chrome. I use Angel Wax Bilberry, it smells wonderful and gives great results. This wax is much softer than normal paint wax and is just like spreading a room temperature butter.
Ideally you will allow the product to cure and then buff it away. I apply it liberally but I don’t buff it completely away. This will leave a thicker barrier than you really need, but I just like a thick layer. This will make the chrome dull, but just make sure the wheel is fully coated.
The rubber tyres can be susceptible to cracking and I over apply an amount of Meguiar’s Endurance tyre gel. This product protects the tyres and keeps the rubber nourished. Applying this much will usually give rise sling as the car rotates. But as the car is now stationary it won’t be a problem. While you are at the wheels check the tyre pressure to make sure they are correct so they don’t deform.
If you have metal dust caps like I do, before putting them back on, squirt a tiny amount of WD40 or similar product that will make sure the cap doesn’t corrode metal to metal.
Glass is given a good clean, to make sure nothing is stuck and will be difficult to remove after a time of being laid up.
Where the rain or water car wash water can get into the car I make sure there is some water repellent applied. This is especially at the end of the rain drip rails that goes into the rear quarters. I squirted an amount onto the drip rails so it follows the same path as the water.
As the doors will be shut you don’t want the weather seal to stick and possibly tear when you go to open the door again. I use a Chemical Guys Tyre + Trim Gel which is dry to the touch almost straight away. I could have used this on the tyres obviously, but I prefer the Endurance.
It’s applied around the door frame and also to the rubbers under the door. Around the screen glass both front and rear there is a layer of black mastic, not how they came from the factory, but it seals the windows properly. The top right photo below shows an arrow where the before and after on the sealant.
The two images above is the trunk area where the before and after can be clearly seen as it’s applied. For the chrome trim and the wipers these are given a a layer of wax, again not buffed to a shine. Before shutting the car up, open the windows a little so that the car doesn’t sweat and go mouldy. Allowing a change of air will help prevent this as well. Having an open ventilation into the garage can have a minor advantage for fresh air, but it doesn’t allow for the dehumidifier to control the moisture in the garage environment.
The battery trickle charger CTEK MXs 5.0 is connected as I always do when the car is in the garage.
I removed the screen washer bottle and rinsed it out and hung it up to allow it to dry. Previously I have left water in the bag and it had gone bad and stank with things trying to grow in it. I had a bit of a job to get it clean again, I won’t be making that mistake again.
Inside the car is a quick vacuum out. I tend to keep a couple of old air fresheners for the winter, give them a quick spritz them with Mitchell & King Leather scent. I hang the air fresheners back in the car being sure to make sure they are free hanging and not touching anything. Inside the car I tend not to pull the parking brake on as this may seize in place. If you’re worried about the theft you could use a T Park Handle lock here for a bit more peace of mind.
Finally the car cover goes on and the humidity gauge goes on top of the car in the middle to get the average reading of the garage. the sweet spot is 50%, with a couple of percent either side.
Last thing is to turn the dehumidifier on which I have already got set up from the previous years which sits around the fifty percent mark all year round now. On the back of the unit there is a filter which is removed, cleaned and replaced. It doesn’t hurt to squirt a little air freshener towards the back of the unit in order to give it a little freshen up.
I do have a little tip regarding the dehumidifier, hang an air freshener near the unit, this will fill the garage with your scent of choice. The downside is that the freshener tends to get dried out fairly quickly due to the functionality of the dehumidifier.
With the car now laid up for the winter I still tend to open the garage up in the nicer weather once or twice a month to let some fresh air in and make sure there are no leaks and that the dehumidifier and the the battery trickle charger are still working ok.
When the new season starts I have to remove all the waxes, and the over application of trim on the paint. this isn’t much of an issue as I give the car a service, grease, check the brakes, full valet and good once over before the first show anyway.
I hope that helps a little and gives you some tips to store the car short term.
I thought that the Stonham Barns (parts one to three) was going to be the last car show of the year for me. For all intense and purpose it was as the second show at Stonham Barns on the trot would be rained on and I wouldn’t go anyway. That was until I was checking on my Facebook page very early this morning after one of the dogs decided to stand on my face as he wanted to go out. I was laying there trying to get back to sleep while the dogs settled back down, I stumbled across a post that said coffee and cars at a little place about ten miles away from me. I checked the weather and it was going to rain early afternoon. This ‘gathering’ was a simple turn up, have a social coffee or bacon sandwich and look at some cars that may turn up.
Hennessey Performance based in Suffolk are a Performance Parts Stockist, specialising in Prestige & Performance vehicles, they sell things like alloy wheels, heat management wrap, oils, merchandise etc. Not to be confused with the Hennessey tuners in the USA.
I made the decision to go, a couple of hours in the morning and then back home again would be ideal. I got the car out and remembered that I needed fuel from sitting in the last stupid traffic jam from the last show at Stonham. The event was only a few miles away, I thought that driving conservatively there and back again I wouldn’t need to top up. Over the winter I always run the fuel down as it goes off in the tank and causes running issues next time I start it up in the summer.
I have driven past this place a few times, but didn’t realise it was there. There was no traffic jam this time and I just pulled straight into the yard and was directed where to park up in a really nice position.
I got out and had a quick look around looking at the cars still coming in. Some were directed onto the grass field to the right adjacent to the yard on the left as you drove in, others were directed onto the yard for parking.
Directly opposite me on the edge of the field was a line of black cars that looked pretty cool. Just to the other side of where I parked was the coffee and food barn with three super cars parked out the front of it.
I decided to go for a wander and pick Marts Car of the Show, what I picked even surprised myself. This was going to be difficult as there were super cars there worth hundreds of thousands of pounds each. It would have been so easy to pick any one of the McLarens, Ferrari’s, Aston Martin, Nissan GTRs or the odd Lambo. There were so many Porsches there I didn’t take many pics of those, also there was plenty of the out of the showroom Ford Focus STs or a couple of year old BMWs and so on, I didn’t want this post to look like a Tesco’s parking lot filled with expensive cars you can see just about anywhere. It was obvious that this gathering was going to have a distinctly modern feel about it.
As this was a ‘performance’ gathering there was some great cars of yester year that were now becoming classics in their own right.
As I got to the end of the row opposite me I wandered down the row of cars on the field to see what was there.
I wandered back to the main area a rather nice Ferrari pulled in. I have a very big soft spot for these 308s anyway, and for me was the runner up for Marts Car of the Show as it was a really nice example in an unusual colour for a Ferrari, which suited it.
Back to the main area again and the cars will still coming in.
The three cars parked out the front of the refreshments;
I wandered back to my car and was asked if I could lift the hood, for once I hadn’t done it as not many other cars had it.
Just behind where I had parked up there were some units that were opened up, one was the Hennessey unit to flog their stuff.
The other had a track car in bits doing something to it to make it go faster I guess.
Marts car of the ‘gathering’ rather than ‘show’ was this little Suzuki Cappuccino. It has a 0.6ltr engine which is the size of a piece of A4 paper. The owner hadn’t had it long and he uses it as his daily driver. This isn’t a UK spec as it had been imported from Japan a few months ago.
Outside the merchandise unit there were some stools which had now become free, so I decided to assume the position and take some different photo angles of my car and watch the world go by for a while.
I left just after mid day as a number of other cars were starting to leave. It was a another gentle drive home and the fuel was almost on the empty line. That was fine with me as I was going to prep the car for the winter storage.
It was a good gathering and spoke to a few nice people, not as many as I normally do at a proper car show. The conversations I was listening to was about the amount of boost and what type of horsepower they were running. Me, no boost just a v8 with plenty of torque that will drive along in top gear gear at 25mph. I do believe I was the oldest car there apart from the ‘hot rod’ and the Pontiac station wagon that wasn’t a runner. I would make a point to go to this one again that’s for sure. A good way to end my run of car shows for the year.
The start of this post was the walk back towards my car which will take in the centre arena which only had a dozen or so cars in it. I was now at the far end of the field and there was a few military vehicles on show.
The cars in the centre ring were ‘movie cars’ and a couple of other random things. Not many cars look good in pink, but I expect a big Caddy to be pink!
This is a replica Bullitt car with the resident keeping a watching brief on the big bad Charger. These pair get around together and I have seen them at the Enfield Pageant. The Bullitt car was a 390ci big block, unfortunately this replica is only a 302ci.
This replica GT40 is a CAV GTR made in 2009 is an awesome looking lady that’s for sure. The trumpet intakes just scream classic car and I’m a bit partial to that look, I would like to think that the 390ci under this hood sounds as good as it looks.
This 6.2lt Rally Fighter looked a lot of fun.
Eleanor was there, but it wasn’t the best replica I have seen to be honest.
There was few traders and auto jumble there, but nothing that exciting, it was more of a car boot sale and my money stayed firmly in my wallet.
Marts Car of the Show
My favourite there was this Lamborghini Espada Series 3 from 1975. A rare car with a total of 1217 Espadas made between 1968 – 1978. The styling of this car still holds up today, yes it’s a super car and really liked the Peerless, it’s the first Lambo Espada I have seen and I wanted to go home in it. After I had taken my Mustang home of course.
I eventually got back to my car as the lunch time sunshine was beating down. I took a couple more picks of the club cars, a couple didn’t make it as they broke down sitting in the stupid traffic jam.
The best part of the afternoon? The big white tent was still empty apart from a few bales of hay. So I got my chair out and put it in the tent where I could still see my car. I sat down with a well earned drink as it was getting warm, no need for the sun creme. About an hour or so after I sat down the rest of the club returned and we all sat in the tent for chat. So the selfish traders were standing in the beating sun while we were nice and cool in the shade.
The corruption I eluded to in the first post was something I have come to expect from this show, and all the shows held at this venue come to that. The prizes were announced at just past 3pm. The compare said and I quote; “The car of the show goes to my ol’ mate…”. Yeah yeah, yeah – what ever! I didn’t need to hear anymore and switched off at that point. Some might say it’s jealousy or sour grapes. Nope, I have mentioned this happens before from this show, so I was expecting it. In fact I didn’t even give my car a wipe over as I usually do when I get to a show as I knew it wouldn’t matter. There were some beautiful cars that deserved to win and I feel sorry for those guys. I had a great day talking to the guys in the tent.
At around three fifteen I started to see a few cars leaving before the 4pm closing time. I said my goodbyes and packed up to come home making sure I missed the rush to get out. The organisation of the show this year was bad, traffic jams to get in, spaces not marked out correctly, and cars parked in weird lines. It wasn’t all bad like I say, I spoke to few people and enjoyed my day, the sun was out mostly and I sat in a cool tent. I was spotted by Matthew Filby and Emily Silkstone who kindly took the ‘Culford Car Show Pro Shoot’ photos a couple of posts back. Great to see you guys again. 🙂
I got home and made sure I cleaned the car this time and covered her up in the garage. That show could be the last one of the year for me, depending on weather there might be another. I was thinking about posting what I do when I lay my car up for the winter, would anybody be interested?
I have come across a some documentation for fasteners used by Ford between 1955 and 1973. Not the most riveting of reading for most people, but all those little symbols mean something on the top of the fasters – bolts and screws etc. I will do a little post on that soon. If your into concours car shows, have a classic Ford, then this document could be the difference of winning and losing!
Carrying on from my post part one of the show, I moved down the line of cars and came across a true iconic cars ever made, the classic Model T tourer. The only thing I didn’t like was the ‘slow vehicle’ slapped across the back of it, but I could see why they did it. This little gem almost got my vote!
Another poster of cars I had on wall was of the white Lotus Esprit from the James Bond movie, The spy who loved me. So this one is in black, but who cares? It’s still a stunning looking car to this day.
This car is a Jaguar kit car and was a popular vehicle, I did like the hood ornament as it was rather unique!
A little group of Mustangs, the blue ’65 coupe here has gone all out for chrome. I know I clean my car to death, but all that chrome must be a nightmare.
It was here in the field that I eventually made my mind up for the runner up spot for ‘Mart’s Car of the Show’. I came back to this car a couple of times. This Peerless Grand Tourismo. It’s the first time I had seen one which isn’t surprising as only 325 examples were produced from 1957-1960, beautiful car and also now a very rare car.
The next post will be the third and final post of this car show. Hopefully I have shown some different cars rather than the usual ones you tend to see. Next post will feature my car of the show which is another rare car and still a head turner even by todays standards.
The last two car shows I hadn’t attended as the weather was supposed to be raining. My app said rain, my wife said rain so therefore it will rain and I wouldn’t go. The show in particular I was most hacked of about not going to was the Helmingham Hall show which is always a good show and I even pre-paid the £10 entrance fee, but as it’s for charity I didn’t mind. It threatened rain at our house but it didn’t and was a nice day and I ended up painting. I did hear from a friend who braved the day that there was rain for about half an hour at Helmingham. Not that I was glad it rained, but just because I could sort of justify it to myself that I didn’t go. Anyway the weather was due to be nice for the Sunday show, I got the bag packed on the Saturday night, I even tempted fate and put some sun creme in the bag!
The sun came up and stirred me awake as I forgot to pull the blinds down, then what seemed like five minutes later the alarm went of. I was greeted by broken clouds, the nice white ones and not the ominous really dark grey jobs. I got the car out and had a nice steady cruise up until I got to some speed restrictions of 50mph, where I slowed a little to abide by the restrictions. Low and behold some dick head lorry driver tried to push me along as I obviously was going much to slow for the inpatient idiot. At one point I couldn’t even see the lorry’s number plate due to his tailgating, which is a offence now in the UK. Nearing a turn right the traffic was busy to cross the junction and there was a queue, unfortunately the lorry driver had to wait, just like me which did make me smile.
The minor country roads are OK once you crossed the busy junction, but this time there was a traffic jam to get to the show about a mile away from the entrance, I sat in traffic for about forty minutes. Not ideal, and a couple of cars turned around in front of me and obviously decided not to attend. I eventually arrived at the venue and followed the other cars in. Bury Retro Car Club usually has a nice tarmac hard standing pitch every year which is great. This time there was the first cock up, although the barriers had the Bury Car Club sign hanging on it, the traders had seen the marked up on the floor and pitched up already by the time myself and the rest of the club turned up, about fifteen minutes after me. I asked where to park and the marshal had no idea and said to park up in front of one car also from the club waiting for some information. We decided to park in front of the stalls as they didn’t want to move.
The organiser found us about thirty minutes later and came up with a compromise to park by the white marque tent, it wasn’t ideal, but we agreed and parked up.
After we parked up and had another chat I decided to go of and take some photos. Throughout the day I took just over three hundred and seventy photos, of which I will use around three hundred and forty, so I will split this show into three posts. I have the Mart’s Car of the show in part three, and a runner up this time which I will share in part two’s post, it was a close run thing to choose. As usual this event had the official cars of the show which is totally corrupt, I will explain in part three.
This little field was in front of us and few cars hadn’t turned up at the time I wandered over.
The main field was the second cock up; they had arranged the cars in a couple of rows where they were parked bonnet to boot (hood to trunk) and the lines were a bit all over the place. So in no particular order as I was zig zagging the lines taking the photos. So in this show there is a number of rear end of car photos as you couldn’t get a good one from the front.
This volks wagon had a 2.5lt Subaru engine bolted in the back of it and sounded rather awesome as it pulled in.
One of favourite super cars was the Ferrari 308 and this was a great example. I could have picked this as my car of the show, but it’s just a bought Ferrari and they made thousands of them. Still a very pretty car to look at. The paint was badly swirled and could do with a really good detail and paint correction.
A few cars up was this Audi 1000 Saxomat which has two clutches, I had never seen one of these before, and very VW Beetle-esq for styling. The radiator was at the back of the engine bay.
This guy had a second Saab that he turned into a trailer during lock down for Covid! The guy had done a good job even matching the wheels.
The weather was playing games one minute it sunny then it cloudy, but at least it wasn’t raining. The cars were still coming in and the show was getting quite busy.
With the sun making an occasional appearance towards lunchtime the show was in full swing with many cars parking up expanding the car show area. I wandered towards the main hanger where some swing music was the background throughout the day and was rather nice.
The main hanger has storage carcoons which are atmosphere controlled.
Within the hanger were some projects that could be purchased in various states of ‘project’.
Back to the cars that were around this side of the show area.
Here I hound Marts car of the show, this really nice Lancia Fulvia.
The rest of the cars seemed to be parked up, with a couple of cars being pushed into place as they seemed to have broken down. 🙁
I left at around three as I spotted some dark clouds looming the car show’s way. This photo was taken by Bridge Classics. The car’s colour looks a bit teal coloured, I sort of like it!
About ten minutes after I left the dreaded spots of rain hit the windscreen, I decided to go the longer route home, but would be faster as it was all dual carriageway. The rain stopped as I headed in a Westerly direction, but when the road twisted and turned it was as if I drove back into the rain again. I started to speed up in order to outrun the rain, it was sort of working with the wind buffeting which was drying the car going along. The roads were still dry so there was no spray to deal with. It wasn’t until I was a couple of miles away from home that the rain finally caught up with me. I drove straight into the garage where I dried the car and made sure the dehumidifier was on full pelt to take the moisture out of the air. The warm engine would help keep the garage moisture levels down too. I turned it back to normal a few hours later in the evening. I had almost gotten away with it, if I had of left quarter of an hour earlier I would have maybe missed it. But, then I would have gone the scenic route home and then I would have got rained on regardless. Lets just say that my journey was rather enthusiastic on the way home and a trip to the petrol station is certainly required for the next car show, that’s all I’m saying.
To finish up the rest of my ‘runway’ shoot!
A great show and I would go again for sure. Such a variety of cars without the pop and banging exhaust boys there. I spoke to some amazing people again and I even had an old friend from my old place of work come to say hello too.
Going back a few weeks I was at the Culford Car Show which is one of the biggest in the area which I always enjoy. I took plenty of pictures and spread them across two posts. My photo’s come out pretty much OK on my trusty Samsung S23 Ultra, but they are not perfect like a proper digital camera and quality lenses.
At the show I got talking to a couple of photographers; Matthew Filby and Emily Silkstone who stopped by my car. They showed an interest in my car we had a really nice chat and they took a number of photos and offered to send them to me. True to their word they have done just that and I certainly wasn’t disappointed. I have only just gotten round to making this post of great their work. In return for their kindness and photos, I said I would be more than happy to give them a shout out to their social medias.
Matthew Filby: His Instagram account can be found here, @matthewfilby
Emily Silkstone: Her Instagram account can be found here, @stoneandlightmedia
Her Facebook account can be found here, @stoneandlightmedia
Please pop over and see some more of their great work and give them a like and follow.
Thanks to Matthew for allowing me to use the these photos he had taken below.
Thanks also go out to Emily for allowing me to use the photos she had taken below.
Again a really big ‘Thank You‘ to Matthew and Emily who have both taken some great shots of my car which I don’t post up that often. I really do appreciate you sending them over.
