Tag: Onemanandhismustang

Enfield Pageant Of Motoring ’24 (part 3)

This is the last of the three posts for the Pageant. I will start this post with the all the random Mustangs that were around the field. There was even a ’67 fastback in Acapulco blue as well.

The guy that owns this fastback has the UK reg plate ‘JJZ109’ which of course is the Bullitt number plate (or reg plate). This car is often seen with a black charger at the same in car shows. The owner has decided that he wants this car to look even more like the movie ‘hero’ car and has started to rough it up a bit. The damage here is intentional. We must remember that it’s the guys car and we shouldn’t judge, I’m not sure it’s something I would personally have done to such a nice car.

In the main tent there was a selection of cars from movie sets, the guide in the tent was telling me that one of these cars is said to have come from “Downton Abby” TV series here in the UK. It’s a series that I never watched, as it’s not my thing. So I tried to Google the cars, but my searches haven’t found the car(s), again I’m happy to be corrected on this.

Leaving the tent to go onto the other side of the field there was the main club stands. I mingled around them to get most of them in shot.

I mentioned there was an unusual engine at the show. This is it, a Merlin engine from a WWII Spitfire plane.

The engine fired up a few times throughout the day and it drowned all the noise out from the field. I couldn’t get near the engine as it was constantly busy. The sound, just deafening and mesmerising at the same time.

I was back at the Mustang Maniac stand and there was a steady flow of people wanting to speak to Adam and ask about the cars, especially the ’73 red convertible that he had up for sale. I got my chilled drink and set up my camping chair for a well earned sit down.

The sun cream was slapped on and I enjoyed sitting down people watching f or the rest of the day. Before I left for home I had a secret weapon – a can of Red Bull sugar free. I finished the can and got into the car around half four in the afternoon and set of for home. I wanted to be fully alert as I suspected I might be tired on the way home. The slogan that ‘Red Bull gives you wings’ wasn’t quite true as I had to endure the lunatics driving on the M25 back home again. To fly home would have been nice, but I wouldn’t have enjoyed my car. Once I got back onto the main dual carriageways again getting away from the London area things start to calm down and I could relax a little on the way home. I even got the odd wave from kids in cars and the odd motor cyclist too. As I drove into my road I could open the garage door ready to drive the car straight into the garage. I didn’t cover the car as I would have to clean the car on the Sunday. Why the rush and not clean it as I always do before garaging? It started to rain. I managed to get the car in the garage with just a few spots of water on the car. By the time I got the trunk unloaded, closed the garage door behind me and got into the house, the rain came down like a tap. Literally a minute later on the road and the car would have got soaked. As far as I was concerned it was a great day out at a very busy and popular car show, great company, and I spoke to many really nice people about my car too. I couldn’t of asked for more, apart from my bed as the Red Bull had worn of and I was pretty tired to say the least. On Sunday the sun was out for a couple of hours where I managed to clean the car, cover it up and plug in the trickle charger back in ready for the next adventure.

Driving a classic car can be tiring for long distances, just ask any owner. We are constantly looking out for people who want to wreck our cars through their stupidity or their inconsiderate actions. We are looking for pot holes, lose gravel in the road for stone chips, debris in the road, keeping a good distance from the car in front etc. the concentration can be intense!

Share my Content

Enfield Pageant Of Motoring ’24 (part 2)

As I finished my last post I mentioned that part 2 will show my favourite car of the show and here it is; the mighty DE Tomaso Pantera. I had a long chat with the owner who was telling me about the 351 Windsor engine in the middle which tends to set the neighbours car alarms off when he starts it up in the morning. Not many of these cars around now and this was a fine example, just beautiful. Another poster car for many teenage kids.

Moving on down the lines of cars I was working way towards the stalls on the right hand side of the field as you drive in.

There was a an old School bus (I think), which had been converted to a motorhome. I would loved to have had a look inside, but it was all closed up unfortunately. I would love to be enlightened what these vehicles are under the yellow exterior and can you even buy them?

I was at the end of the individual entries of cars and at the main tent and funfair. The was a display of radio controlled models that were on an oval track which were just smashing into each other demolition derby style.

I spotted this dog who was totally at home on this tyre and was getting lots of attention.

There was plenty of stalls for auto parts as well as the usual car boot or yard sale items. There was a live band playing regular sets throughout the day, but we didn’t get much chance to hear them from where I was with Mustang Maniac.

After this section as the for sale stalls it was time to move over to the other side of the filed which I will bring in ‘part 3’. There will be an unusual engine and the block of Mustangs collated from various parts of the field.

1
2
Share my Content

Enfield Pageant Of Motoring ’24 (part 1)

On the 25th of May I attended the Enfield Pageant of Motoring as a guest of Mustang Maniac. The weather looked promising and was going to be a very welcome change from the usual rain over the weekend. The Saturday was going to be the better day with some showers on the Sunday. So the Saturday I got rudely awoken by the alarm at five in the morning, or should I say middle of the night? I sort of stumbled out of bed, woke the wife and then the very short process of waking the dogs from their deep sleep to then being ‘off on one’ wanting to go out right there and then. I eventually got ready and and loaded up the cool bag with lunch, snacks and drinks. I had previously uncovered the car in the garage, disconnected the trickle charger and already put in the the postcode into the SatNav, I just needed to plug it in and turn on from ‘sleep mode’ to resume the directions. The dash cam also sprung into life as the engine fired into life. I sent a text to Adam to say that I was now leaving just a little before six.

The journey there was interrupted by a obligatory stop at the Shell VPower station for a little top up of five gallons. I didn’t fancy having to pay London prices on top of the already premium cost of the VPower fuel. I got back on the road and thoroughly enjoyed my drive, that is until I got to the outer London car park also known as the M25. Then within a space of two miles it seemed as though it was the film set of Mad Max Fury Road where everybody was trying to kill each other. I did my best to avoid the carnage as best as I could, I was traumatised by the time I got off the motorway. There was speed cameras what seemed like on every gantry and the lamp posts when I got the motorway some short ten minutes later. I got to the Pageant at around seven forty and drove up to the Mustang Maniac plot. A total of seventy seventy three miles to get there.

Adam and Lance were there unloading the Falcon and the electric (road worthy) buggy he had there for the weekend.

We had a quick discussion on how we were going to park and I took the corner spot. I then had a little drive of the Falcon to park that up too.

I think Adam felt sorry for me as he kindly bought me and Lance an all you can eat full English breakfast at the carvery just before you enter the show ground. You can trust me when I say that they didn’t make any profit from us as we certainly die honour the ‘all we could eat’ offer. In fact I was so full after the breakfast and ‘free refills’ of soda that I didn’t eat for the rest of the day. I think my veins were pumping pure cholesterol rather than blood, but it was very nice I must say.

On the day I took just over three hundred photos. Some of those photos I have shared with Mustang Maniac for their blog. I try to keep my posts to around a hundred or so photos to keep the loading times down and not make it a scroll fest and getting bored. So I aim to post these three posts in fairly quick succession.

The walk back was welcome to stretch of the legs and helped walk some of the breakfast down. There was some more cars turning up on the stand and we even had a Pontiac ‘ringer’ park with us.

Adam relaxing after the breakfast and sitting with his much loved vintage flat bed.

Directly behind the the Mustang Maniac pitch was the Afro Classic Register who were providing us with entertaining music throughout the day via some more than capable in-car sound systems.

To take the pics I started in their direction heading towards the back of the field. This part of the field where individual entry cars were lined up in rows. I wandered up and down the rows taking pics of the interesting cars, rather than the six year old everyday cars that were parking up.

This is the end of the batch of rows and is an ideal time to stop ready for the ‘part 2’ of the show. I came across my car of the show at the start of the next post.

Share my Content

T Park Lock

I was going to post all about my second to last car show, but I have some exciting news where I have teamed up with Mustang Maniac which I can share with you today. (I have been given permission to use their photos and video.)

Mustang Maniac has developed a replacement standard “T handle” shift lock for the early Mustangs ’64 to ’73.

It’s called the “T Park Lock”

The handle is designed to be a direct replacement part of the original T handle, but will retain that all important stock look. The lock works by putting the shifter into ‘Park’ and simply pressing in the button on the right of the handle. This locks the black button on the left from being depressed and so you can’t move the gear stick into any drivable position and the gearbox stays locked in ‘park’. Simple, but effective. Anything we can do to slow or prevent our precious cars being stolen is worth it. For a relatively small amount it think it’s a must have purchase to be honest.

With the lock in place nobody will really notice any difference from the stock T handle.

When the handle is unlocked the barrel will spring out and stop. With the lock disengaged the chrome of the handle continues on to the lock barrel itself.

When you have unlocked and removed the key (optional to remove the key), you just shift as normal, if you do press the button in while going along, you can still shift to neutral when convenient to unlock again. Or if you prefer drive with the key in the lock simply unlock again when you need to.

The lock comes supplied with two keys and as are unique to that lock, none of the that one key fits all the locks the same!

To fit the lock it’s a two minute job, remove the old handle, replace it with this one and tighten into place. For added security you can place a small drop of glue onto the grub screw to stop it being removed via the allen key. No garage fees to fit, or maintenance. Fit and click.

I have personally been using the prototype of the product for the last few months and it works flawlessly. To see it in action the Mustang Maniac guys put up a video of the lock in action.

I will be selling these and can be purchased here.

You can also see the link under my “For Sale” heading in the top menu bar.

OR copy and paste this link into your browser: T Park Lock – One Man And His Mustang

If you need any further details, help or questions, just leave a comment or contact me.

Park up & Lock up!

Share my Content

It’s Snowing All Year Round

I have been asked a few times about snow foam when I have been to car shows. I do use it now, depending on the product and how you use it can make a nice difference or leave you bitterly disappointed. When i started out with snow foam I just didn’t get it, what was I doing wrong? Combinations of equipment and product trials I eventually managed to get results worth talking about. I decided to create a little article of my own which I hope will help and guide you through the pitfalls and hype between products, or why we even consider using it. I mean it wasn’t around fifteen years or so ago so do we need it and why?

Snow foam looks amazing from a distance and often gets a few looks when you use it. Before this step was introduced, you used to get as much car shampoo bubbles on the paint to wash it right? This cleaning process has now been separated out into two steps. The snow foam and the shampoo. We will only be dealing with the shampoo step here.

Put very simply snow foam step is there to reduce the likelihood of damage to the paint during the cleaning process, a “Pre Wash” non touch step. This snow foam process is not necessarily restricted to car detailers or professionals, but also the weekend washer.

When you wash a dirty car with a sponge or a single bucket wash, the chances are that you could introduce paint damage by microscopic particles damaging the surface of your paint as they cling to your sponge or microfibre wash mitt. The deeper the damage, the worse the paint will look. I have explained these principles in depth on another article here and how to fix them. The basics are highlighted in the picture below to show the varying degrees of damage.

Common Terminology:

  • Pre-wash: A treatment that helps to make contact washing your car easier and more effective. 
  • Non Touch: Cleaning without any physical contact with the paint.
  • Contact Wash: Any part of the washing process that touches your paint.
  • Contact time: How long your cleaning solution is in contact with the dirt on your car.
  • Dwell Time: How long the product needs to be left in order to work its magic.
  • Foam Consistency: Thick snow foam clings to cars, so it has a high contact time. Watery snow foam will dribble off your car, less contact time and won’t be as effective. 
  • Cling: The ability of the product to stick to the panels without falling off.
  • Dilution: Reduction of concentrate to make the correct mixture operate effectively without waste.
  • Canister: The container where the mixture is held.
  • Snow Foam lance: A special nozzle for your pressure washer that turns the snow foam liquid into a thick foam. Also referred to as Snow Cannon, Snow Gun etc.
  • Nozzle: The end of the lance/cannon/gun which controls the amount of product and how it applies the foam to the car.
  • pH neutral: A substance which is neither acidic nor alkaline but chemically neutral.
  • Water Spots: The marks left behind from the hard water drying out on the paint work.

We know that (contact) washing a dirty car will make it look better, but done wrong that short term cleanliness will be taken over by swirls, marring scratches etc. So before you even think about putting a wash mitt or similar cleaning item, the less debris that there is on the car, the better.

This is where ‘Snow Foam’ comes in. The snow foam is designed to cling to the paintwork, which will in turn moisten and loosen up any of the surface dirt. When you rinse and wash off the snow foam it should take the dirt and grime with it. This in theory will leave you with a much cleaner surface to clean with significantly reduced chances of damage to your car’s paint job.

The ideal scenario is a foam that will dwell on the paint for a while, then roll off the paint prior to rinsing taking the dirt with it.

How does a Snow Cannon work?

In a nut shell; the water pressure from the jet washer creates a syphon that lifts the snow foam mixture from the canister via a pipe into the pressurised water stream. The wire mesh inside the the cannon body agitates the mixture up into foam. More water the less dense the foam and will lasts longer. The nozzle is the key as to how the foam is sprayed onto the car, anything from a jet spray to a wide angle fan. These cannons can vary from £15 to £100 depending on style, fitting(s) and quality of build.

Misconceptions:

+ The thicker the foam the better.

To a degree this true, but what is the point of a great foam if it sticks to the car, but doesn’t clean it? If the snow foam is more like a bubbly water and bounces straight of the paint then again it has done no good. There is a happy medium based on the car’s requirements and is explained a little further down.

+ PH Neutral is a must.

If you start researching snow foams, at some point the chemical composition will show up. So all you really need to know is the difference between pH neutral and non-pH neutral (or alkaline) snow foams.

The pH obsession has arisen due to information propagated by self-professed experts on the internet. In actual fact, most damage to car finishes is caused by tiny particles stuck onto a road film or dirt that cause abrasive damage when being removed by washing with mitt or sponge. Thus inducing the swirls, hologram, scratching and paint wear depending on the severity of damage to the paint.

Even some manufacturers of ‘ceramics’, last stage products and waxes insist on a pH7 (neutral) shampoo or cleaners.

This intrigued me, so after a quick bit of Google research it showed me that the normal range for rain water is pH 5-6. (Look it up if you don’t believe me! ‘pH balance of rain water’.) This is one of the main reasons that your car wax/sealants tend to loose their effectiveness over time and need reapplication.

+ pH Differences

A pH neutral snow foam is generally gentler on your car’s paintwork, so it’s worth getting if your car is valuable or needs to look its best for a special occasion. This comes at a cost as heavy debris is still there.

A normal or regular alkaline snow foam isn’t quite as good for your paintwork, but it is more effective at removing dirt. However, you can easily mitigate some of the effects on your paintwork by giving your car a proper wash and wax, though, which will put a new layer of protective wax onto your car. If you have the protection on the car, the alkaline snow foam won’t remove the wax protection or touch the paint anyway. It’s certainly not a caustic mixture for your car.

The damage from a heavy alkaline product is; caustic soda (sodium hydroxide). This can dull and leave paint finishes matt and lifeless when used on a long-term basis.

Perhaps you may need two types of snow foam, regular maintenance wash for light soil using pH neutral product, and a stronger alkaline for the heavier soiling when needed.

+ You need a jet wash or pressure washer

Nope. The jet wash is not the be all and end all of the snow application to the car. Some snow foams are quite happy to be applied by a hand held pressure pumped bottle. As long as the foam product is the correct dilution, is applied to the paint and allowed to dwell before its removal – then its job is done.

+ All Snow Foam lances are the same

Nope. They come in all shapes and sizes. Some brass body, some made of cheaper metals or plastic. You get what you pay for.

Honestly, I had a Karcher cannon that could barely muster a lather no matter the product. The Autbrite snow cannon with the same mixture was an incredible difference. My only advise here is to make your choice wisely.

+ You must use Snow Foam

Well sort of. You could use some good quality shampoos at a push. But their pre-wash cleaning ability is not as good as the snow foams. Most car shampoos tend to have additives to allow slick washing and glide the cleaning applicator (mitt of sponge) over the paint and a level of protection. It’s best to get a product designed as a snow foam.

Types of Snow Foam:

Apart from the pH values as we have discussed above most snow foams are pH neutral. The main differences are the cost per litre when mixing for the dilution ratio. The cling properties which varies a great deal, their proclaimed cleaning properties, colour and the scent. Some of these scents are sublime; water melon, lemon, citrus fruits, strawberries, cherry, beer etc. Or nothing if just want a no gimmick product that does the job. I have used a few in my time:

Some have been worse than useless, some have been better than others and one is my now go to product.

Application:

Mix your snow foam as per the manufacturers recommendations. This is usually a ratio of around 1:10 or 1:20 etc. some are even 1:100.

Next attach the snow lance to the jet wash, adjust the mixtures and apply (if needed). This will take a little tweaking for the ideal balance between dilution ratio, the water pressure, size of the nozzle and the product you are using.

Different products on the same foam cannon will be very different and need further adjusting to suit.

Most of the products advise not to allow the product to dry out. The product can be affected by the Sun, warm paint, wind rain etc. Most manufacturers go on to say apply ‘in the shade’ and ‘apply to cool paint’ etc in order to mitigate the drying out process of the product.

Always start from the bottom and work up. The huge majority of debris and soiling is on the bottom half of the car. As you get to the top less show foam is needed.

Types of application.

A snow foam application will solidify into nothing eventually and slide off the car. If the snow is to thick it will fall of the car (no clinging properties) in clumps before it has had a chance to work. So, thicker is not always better. But it does look good below.

After a few minutes of dwell time it will look less impressive.

Some of the poorer week applications look half dead before they are applied and very watery. These products tend to run off and dry out very quickly.

If the product starts to dry out, there is no harm in reapplying more.

Some of the better quality products have ‘wetting’ agents in them to aid in keeping the product wet on the paint to avoid it drying out. This product application is a little thin now, but was taken after a few minutes. Although below looks less, it has in fact been doing it’s job well and was staying like this without additional applications.

Once the dwell time has elapsed, rinse of with a medium force jet wash. You can then wash the car as normal to avoid any water spots.

Results:

The results vary considerably by product. I have some before and after pics to show what it was before the application and what was there after rinsing.

Here is a very well known market leader product that has a very good cling and thick foam. But, it left a film of dirt and didn’t wash off the dirt.

Another very well known brand but is a cheaper product. Thin application, not very good cling and failed to wash of dirt. the dirt was still on their without being moistened.

A Premium brand, clings well, but failed to wash the dirt off completely. The dirt was moistened and was easier wipe off with a finger. So it did help.

This is well know brand to those in the detailing world. The foaming qualities not great and are to be desired. But when this runs of the paint it takes the dirt with it.

This is the result you want. The dirt and film is gone ready for a proper contact wash. It even cleaned some brake dust off!

Summary:

Don’t believe all the hype. The snow foam step is not a magical ‘foam the the car and it’s clean’ process. This foam step is to pre wash the car and should be treated as such. You need to manage your own snow foam expectations depending on the product. I have done a number of snow foam reviews on this website now.

I have been sceptical of the snow foam step even critical to a point. I saw it as the latest fad with no benefit to be honest. I have learned the hard way by working up the ladder. I tried the weaker brands which put a bit of foam on the car and emptied my wallet for no reason. I tried the big name brands which gave a great clinging foam but not much else. I tried premium brands which gave a good enough foam and decent moistening to the dirt. I tried the in the know ‘detailers’ brands. These later ‘detailer’ brands were by far the best performing of all the brands I have used so far.

Some brands are so much better than others to the point I haven’t even reviewed some of them, I used them up as a patio cleaner. After application of some brands, the dirt was not loosened and was still difficult to remove with a finger even after rinsing, like you shouldn’t do by the way. If the dirt is difficult to remove after the snow foam step then you are potentially going to washing a little harder to get the debris off the paint, in turn potentially introducing damage that you are trying to avoid in the first place.

If you are careful and use top quality shampoos with a two bucket method, then you can do away with this step as we have done for decades way before all this snow foam malarkey.

This snow foam step is trial and error which works for you. I have tried at least six products before I found something came close to something i could review or even partially liked. You may need to do the same, or look out for fellow detailer’s product reviews.

Share my Content

A Little Village Day Out

A ‘Bank Holiday’ in the UK usually means one thing, rain. Not all the time but most of the time as a rule of thumb. But this weekend is different as it has been a gloriously sunny weekend for all three days. Yesterday was a local village about 20 miles away, Bardwell where their little village green pays host to a small friendly car show with around two hundred pre booked cars to exhibit.

On arrival the cars were allocated their own parking spaces with a numbered peg in the ground. There was an option to be ‘judged’ in different categories, but you had to pay extra for that. I wasn’t worried about that side of things and just wanted to have a day in the sun and enjoy a bit of people watching. I was parked up next to a newer S197 Mustang and on the other side of me was 280CE Mercedes. The owner of the Merc and his wife were sitting in their deckchairs with me and we had some good ol’ chats throughout the day.

With all the cars parked in place the gates opened at ten sharp to where the public was allowed in. There was a constant stream all day and the atmosphere was fantastic. I decided to go for a little walk after I had wiped the dust and dead bugs from the front of the car cleaned the glass on my car. I think the bugs had Lemmings DNA in them. I do believe that I managed to hit every bug on the way there, it certainly seemed like it though 🙂

I tried to get a few scenic shots in of the show, the best of it was that there wasn’t a single cloud in the sky – all day.

On my last post I took a picture of the back end of my car next to another 65 coupe, this show I managed to repeat it with the S197 convertible.

I saw this car come in and I made sure that it would be my first port of call. The car was a Lamborghini Countach. I had posters of this car on my wall as a kid at school, next to the Mustangs and many Debbie Harry ones. By todays super car performances this isn’t that devastating now, however it’s still no slouch by any stretch of the imagination and will hold its own against most cars. In its day this car destroyed pretty much destroyed everything around that dared to try. Not to everybody’s taste I get that, but what a car it is to see in the flesh and still looks good. Is it automotive art or pure automotive porn?

So I walked around clockwise and no particular order, there where a couple of super cars parked next to a super small car;

At one end of the end green opposite to the main gate was the village pond, I think these cars had the best spot of the day, beautiful backdrop and also the coolest place in the shade on the green.

There was an outside perimeter of cars and a couple of rows in the middle.

There was a healthy helping of luxury cars past and present;

I past this little lady on the way to the show that was just minding it’s own business and chugging along at 20mph or so.

There was a few UK fords in the show and I grouped them together here, most of them being Capri(s);

The USA contingent were scattered around, with only two Mustangs being there. Similar story to the Corvettes old and new side by side.

The rest of the cars that I took a fancy to on my rounds, a few of which I have seen a few times before at local shows.

Just outside the main green there was motorbike collection. I have never seen such amazing bikes with levels of luxury to rival a car. Some of the custom artwork had to be seen to be believed. How on earth do these things stay upright?

Celebrity Spot:

Roy Mcfruin.

This gentleman may not be an A-lister in the general definition of a celeb, but to me – he is. I could of spoken to him for hours and wished I could of done so. I had so many questions, but not enough time to answer them all. 🙁

Roy found me by my car and started talking to me about my car. He told me how he picked up Henry Ford II from the airport as he was given a 66′ Mustang Coupe as a company car. I was so intrigued I asked more; it turns out that Roy was working the SVT in the early ’60s when they were relocated to the Slough works just outside Heathrow Airport in the UK. He told me how he was there developing the GT40’s ready for the infamous 1966 annihilation of Ferrari at Le Mans. He had flown to Dearborn a number of times to the Ford head offices. He was there at the iconic Le Mans 1,2,3 win in the garages. He met Carroll Shelby and of course the race drivers. What amazing stories, I actually met a man who helped shaped the History of the Ford Motor Racing legend that lives on today. Such a nice guy, I hope to catch up with him again.

Thank you for your time with me Roy.

Entertainment from ‘The Nightingales’.

At mid day and two in the afternoon the ‘The Nightingales’ took to the stage to sing a flurry of tunes. They were very good and I stood there for ages watching them. They sang everything from queen to The Twist and of course Mustang Sally. There was a group who looked like they came in the Chevy Bel-Air who were doing some really good Jive and Rock & Roll dancing. Petticoats and flared dresses were cool to look at, but I bet they weren’t so cool to wear and dance around in the hot sun. A great atmosphere with the dancing.

And to finish up the Canine Corner, some very hot looking dogs out for the day.

It was a great day out, I spoke to a couple old friends, made new friends and even allowed a couple of people to sit my car. The drive home was strategically timed, as the awards were being given out at one end of the field furthest away from me, I made an exit to avoid the rush. I thoroughly enjoyed the day and drive home was so relaxed.

It was great to be out and about again. 🙂

Share my Content

A Big Milestone….

Eight and a half years ago, way back on October 28th 2012 I wrote my first post on my little ol’ blog. I had nothing planned other than to share with a few friends what I was getting up to and how I was getting along with my Mustang restoration. Ultimately I could look back in a few years time and take a trip down memory lane with the photos I had taken a certain points of the restoration.

Delivery of my project car 17th September 2011, before it went to Mustang Maniac where I had professional help & guidance on my restoration over the years. Those guys have become some of my best mates of mine as a result.

Looking a little sad
Looking a little sad

When I attend car shows or via my blog and emails etc. I often get asked how I clean and detail my cars;

Some of the Car Shows and photo opportunities;

I get asked how I fitted things, how I upgraded this or that, I even get asked for advice on their own restoration projects.

That got me to thinking about adding extra sections like the tools (a selection of them here), that I used on project and since use, considering that I’m just a weekend warrior with a spanner.

Products that I used to keep our daily cars clean and the Mustang fully detailed.

My merchandise I bought over the years or have been given since I started my journey with the Mustang.

I even get requests to review items, all of which I buy if I think I could use them myself. As a result of all these things, my blog has evolved into an entity of it’s own.

Fast forward a number of years to 2021 where I my little ol’ blog has reached a massive milestone. This is not intended as some bragging rights by the way, but more like myself being proud of the result. Somebody within the USA this morning 15th May 2021 made my day:

My blog has just passed 1,000,000 hits!

I am absolutely amazed to think this could ever happen, I remember getting excited about getting ten hits in one day!

I value every single one of you that has followed me or just pops in for a quick read, like or even the odd comment. I would like to say a massive “Thank You” from the very bottom of my heart.

I don’t actually get anything from my blog/website on WordPress, other than some add money that goes straight to the hosting and my domain fees. It’s sort of self sufficient in a way. If anything I’m out of pocket, but reading the comments and seeing the views more than make up for it. Hopefully I can help somebody, somewhere with something.

My first follower was Debbie Nuessle (click here for her latest venture), from across the pond. We both started blogs within a few days of each other, both revolving around our love of American Muscle cars, especially Ford Mustangs of course. We keep in touch outside of the Blog circle and have become good friends.

I have a number of followers who ‘like’ the posts I put up after even after all these years, thank you all, it means a lot to me. I have such a range of followers; a very talented and well-known Soprano opera singer; Charlotte Hoather (click here for her blog), mechanics, engineers, oil rig mover, artists, photographers, builders, wildlife photographers, fellow classic car owners, writers, product manufacturers, shops, brands, a few younger bloggers, students, world travellers, petrol heads, gear heads, car clubs, writers, novelists, journalists, teachers, photojournalists, professional bloggers, social influencers, religious followers, the list just goes on. (There is even ‘ahem’ some adult orientated content following me!) The full list makes for some amazing reading.

Just in case anybody is interested in some of the more selective stats;

I have a total of 2,700 followers, of which 871 are on WordPress, 2,300 on social media, just over 2000 on Facebook, which is not my favourite of all the platforms I must admit.

I have been visited by 199 countries and the top ten countries in order are; USA, UK, Canada, Australia, Germany, China, France, Netherlands, Finland and New Zealand.

There are stunning islands that have visited me, Mauritius, Seychelles & Maldives. Some of those Islands are so small they wouldn’t be able to fit a Mustang on them! My bucket list is to spend a few days on these islands to chill and take in some sun.

The more obscure countries with a single visit are: Burkina Faso, Falkland Islands, Kosovo, Tonga, Northern Mariana Islands.

To date I have posted 340 blogs including this one over the eight and half years I have been posting on this blog.

These figures are quite low compared to some of you mega stars out, there with you super popular blogs I know that. But for me, like I said earlier, I’m honestly humbled and grateful to every single one of you who wants to look at a blog all about one man and his Mustang!

A huge “Thank You” to you all.

Here’s to the next one million!

Share my Content

A Sticky Situation

Looking for things to do and decided that it was time for a little update again. A few posts ago around Christmas 2020 I replaced my chrome 40,000v coil to a black version. The reason then was that I had erratic starting issues and decided to change the coil just for the sake of it to see if it helped. It didn’t and the coil turned out to be fine and is now a spare just in case.

The original look was a chrome coil with the original Ford coil clamp in black.

On the coil was the Ford sticker to say what it was and add a little bit of authenticity.

I went to visit Mustang Maniac for a replacement as the pics above. I tried to peal the old label off and reuse it. But it rolled up like a toilet roll and just wouldn’t stick again.

I started to undo the clamp for the coil and lifted out the coil.

The old bolt was fine, but as my new bracket is chrome I wanted to polish the bolt with the Dremel, some nylon brush wheel and some final metal polish.

The supplied clamp was a screw head with a nice zinc finish.

My old bolt was a chrome Allen headed style and would look better.

The polished result was quite good and looked better than zinc and chrome. The new bracket was a direct replacement for the old one and bolted straight in.

The coil just drops back in and and then you can tighten the thin clamp bolt to hold it still, and then the single bolt for the bracket to the engine.

The new look is black and chrome, the old style was chrome and black.

The new sticker just needed to aligned up properly and then stuck on.

So the silvery coloured text on the black finish is more visible than the former silvery lettering on chrome.

Although the old bracket was restored and looked OK, I can’t bring myself to chuck it out now. Yes it’s old, it’s worth nothing, it’s the original, it’s pitted and not ageing very well.

The bracket will now be stored with the other old parts that have been replaced, either at the time since then. Will the chrome bracket last fifty five years like the old one? Of course it won’t, but I like the new look of black and chrome.

Bring on the car shows. We need the fresh air and to get out and about.

Share my Content

Making Contact

I mentioned in my last post that the car had a bit of a starting issue which is now cured with a replacement Pertronix Ignitor system from Mustang Maniac. To avoid such instances again I have a back up plan.

The new plan is to have a set of old school points to hand in case of the electronic points breaking down. I ordered a metal tin, I was going to get an old tobacco tin, but decided against it and went for a nice new shiny one instead.

To hold the new points and condenser I got some chunk of polystyrene and cut it to size and pressed it into the tin. As the cable to the points was removed as I replaced it with the Pertronix set up. I made a new cable one with fresh connections and soldered while I was at it. I then marked out the shape of the points and cut it out with a sharp scalpel. I didn’t take any pictures at the time as I wasn’t sure how it was going to come out or if it even would work.

As the polystyrene is a bit brittle I leaves little bits everywhere so I sealed it with a good few layers of clean PVA glue. To stop damage to the components I got a thin foam padding and lined the cut out as well and stuck that into place. The wires were held in place my a shallow cut out groove. The last part was a set of feeler gauges to set them once they were held in place. The mini kit is then all held firmly in place and doesn’t move at a all. Just to be sure I added a little cut out to lay on top.

The lid has now got a printed out label (along with a spare sticker I had), for the gap setting in case I have to use the kit. Even if the points only last me enough mileage to get me home in an emergency – then it’s gob done. I can easily replace the the points with another set which costs less than shop bought sandwich!

The tin looked a little plain on the outside so I have ordered a little Ford Parts sticker to go on the top.

Under the hood I decided that I wanted to replace the HT cable tidies or clips. I wanted something a little more meaty rather than the thin plastic clips. I ordered online a set of v8 plug clips for the 8mm cables I have. There are two four hole, 2 three hole and two hole clips one set for each side. These normally go by the spark plugs to keep them neat and tidy. As I already have a nice polished cable set holder, these were going to be a little more visible.

Me being me wasn’t happy with the finish of the screw heads, they were a bit dull and cheap looking, not how I like them to look.

The next step was to get my trusty ol’ Dremmel out with some metal polish and the appropriate felt buffing attachment. A simple case of a little polish and buff over, they came out nice and shiny.

The before and after is quite obvious and now up to my OCD standards.

Fitting these style of clamps is very simple, it’s just a case of clamping the two halves around the cables and screwing together.

Will anybody notice the difference? Probably not, but I know they are there. They also do the important job of keeping the cables neat and tidy and routed where they need to go cleanly and out of the way.

Following on from the last post I have been asked if I had the fitting instructions of the Pertronix II Ignitor kit. I do and I have added the PDF file here.

A short little post, but I’m just looking for things to do now. I need a car show or two to get me out of the house and some fresh air and a change of scenery. Already this year 2021 we have had two car shows cancelled and it’s only January. 🙁

Keep Safe & Take Care.

Share my Content

At Last

The first car show of 2020 (for me anyway), which took place last Sunday 16th 2020 at Stonham Barns in Suffolk. It took me about twenty five minutes to get there at a gentle pace. I arrived at about nine fifteen and the sky was grey. Forecast was forty six percent chance of rain, I figured it was worth the gamble, I had to go. I parked up with the Bury Retro Car Club whom had a club stand on the tarmac and not grass which is always nice. As I always do when I park up, I wiped the little ol’ lady down with some quick detailer, paying particular attention to the windscreen with glass cleaner. I think the glass had collected more than its fair share of insects for the short trip.

I decided to go and get some photos before the promised rain was due to arrive just after lunch time. With no particular order some cars that took my interest as I wondered around. the sun even showed it’s face for a few minutes now and then.

A while ago I did a little article on the Ford Capri being the UK Mustang here, these photos show the comparison next to each other which was rather nice.

There seems to be a growing trend in the UK for half cars to be the trailer:

More Mustangs including this red ’69 done to concours standards.

VW were out in force and the patina on the beetles was a little extreme, when it’s flaking off.

The rest of the cars I liked:

There was a number of stalls there too, nothing to fancy just the usual auto jumble, which was on the grass just behind the club stand.

Bury Retro Car Club stand:

I thought mu car was quite a long car, when compared next to a stretched Caddy – It’s tiny. The front of the cars lined up more or less level.

Tim Greening let me borrow his video from his YouTube channel; https://www.youtube.com/c/AutoAddictuk/ Thanks Tim 🙂

You can just about catch a glimpse of me chillin out and chatting cars just behind my car.

I took a few pics while sitting in my chair of the new wax I have been using. I did notice the clarity of the shine while sitting there.

I thought I would play around with the colours a bit on this one, black & white with a little hind of car colour.

I left at three in the afternoon an hour before it was due to shut, the wife had text me to say there was thunderstorms at home. I wanted to get home before the car got soaked.

The clouds were blackening up as I did a very quick wipe over before I covered the car up in the garage. As I got out the car in the garage the heavens opened and it chucked it down. That’s what I call perfect timing, literally thirty seconds from rain.

For once I went to a car show and it didn’t rain, I was well chuffed. What could be better than than? I know – a pic of me in the review view mirror of the Jag XJ6 next to mine! I didn’t move the chair to take this pic I just happened to look up and there I was.

I needed that car show. I just had to get out and catch up with friends again, grab some fresh air and look at cars, lots of cars. I had two offers to buy my car during the day, one which was some bloke takin the p!$$ or trying to wind me up I’m not sure which, the other guy gave me his card just in case I wanted to sell, after asking me some good questions about the history of the car.

There are two more scheduled car shows this year that I have booked in to attend. Will the rain hold off for me so I can get to them? I hope so, with all the rain I got caught in last year, it’s the least mother nature could do for us considering the pandemic we have endured so far.

Share my Content