First Time Videos

During some routine maintenance on my PC where I back up my files, then move them to relevant folders etc. I came across an old video that I thought I had lost. So I decided that I would share that video and a couple of others with you. The day was a Saturday 14th April 2012, I had a good mechanic mate of mine; Will from Park Garage Services came round to the house and help me with the start-up. This was a long time before I started to get involved with Mustang Maniac for my parts and the proper restoration process. After a long winter of re-wiring the car to get to the point I could turn the key properly, this was a very important day in the restoration process. I had no idea that this restoration project was ever going to be a blog that it is now, so there wasn’t that many pictures from the very beginning. I already had the old wiring out, well what was left of it that is. IThe old wiring sits in a big box and I’m still not sure what to do with it. It’s old, it’s brittle, it’s burnt and melted, it’s total rubbish, but I just can’t bring myself to dump it. Any ideas what to do with an old wiring loom? Please let me know.

The new wiring had been installed and nothing was neat at this point, or even in the right places come to that. The wiring was just connected up and roughly in place. That very early stage was just to prove the process to myself that it was going to work. Later on the new wiring would be taken back out for the full restoration and paint job, then reinstalled properly and neatly, just how I wanted it to be.

Fuse box location

The engine was not cleaned or prepped in any way prior to this video. It just had the new blue spark plug leads, Pertronix Ignitor II ignition upgrade, new replica battery, one wire alternator, new spark plugs and new cables for earth and battery etc. The starter solenoid was an unknown entity so we weren’t sure if we were gonna have issues at that point.

Being as I had rewired the car myself over a few months each weekend, the wiring was also an unknown piece of work too, I just hoped I had read the book of words (instructions) correctly. In fact the good lady wife had the instructions colour copied and laminated for me. That would mean my dirty hands wouldn’t ruin the paper or tear it. I could keep the originals in a safe place just in case I did lose one section or managed to damage them.

Back to the start-up day; I put two gallons of fuel in the petrol tank and made sure there was no leaks. I had previously turned the engine over by hand with no spark plugs in place, that would make it much easier not having to deal with the compression, the engine wasn’t seized up. I had previously filled up the engine with water and some temporary light oil as the engine wasn’t going to run under stress for any length of time either. Oil lubrication is a critical factor to consider when the engine hadn’t run for twelve years or so for any cold start and engine wear. The turning over of the engine on crank would pump the oil around the engine at those low cranking revs. The car was cranked over for a bout thirty seconds and then left the car to settle for a minute or so. We then primed the carburetor up with fuel via pumping the gas (via the carb linkages) to help fire up and this was video was the result. The headers were straight out as there was no exhaust connected at all, the volume and resonance distorted the microphone on the phone.

My good lady wife was in charge of the camera at the time, this is the first time this video has been on the internet on any of my media platforms.

With the car restored I was arriving home from a car show and the car was filmed being driven into the garage. This is a nostalgic look at the before and after comparisons.

This time the Flowmaster 40 Series mufflers were fitted to the 3″ headers which gives that unmistakable Mustang v8 rumble.

This is also a first time showing of this video on the internet.

This video of the car backing out of the garage was another mate who wanted a ride out in the car when he first saw it back completed from the restoration. The final first time video on the internet video.

Then of course there is the mandatory drive by;

Apologies if you have seen the “Driveby” on my YouTube channel, but I think it’s worth a proper posting on the blog and not just a link.

I have started to review a few more Car Detailing products now and hopefully you will find them useful as well. I have found a couple of real nice products all of which can be found under the “Car Detailing Reviews” heading, the latest being from the Chemical Guys.

I’m looking forward to this coming car show season I must say, seeing these videos has made me realise how much I miss driving her. 🙁

Share my Content

Videos & A Great Soundtrack

On my last post I mentioned that I had a couple of videos to be created and uploaded. The good news is that they are now on my YouTube channel to be viewed as well. I couldn’t wait to do them.

A quick note to point out here, the carburetor was set up at idle and will run all day long like that. But, when the transmission puts the carb under load it will need a few more tweaks for choke, mixtures and float bowls etc. to become more stable. Hence the car sometimes cuts out when cold while engaging a drive gear. It’s an easily sorted out problem of course, but the car will need a few miles under its belt first before those small final adjustments are made once things settle down.

Turn up the volume & enjoy 🙂

The Workshop Move:

The first is of the car being moved for the first from the workshop under her own power. This video was kindly taken by Yogi at Mustang Maniac on Thursday 21st May 2015. The car had all the fluids checked and topped up before attempting to engage the drive from the transmission. The car was lifted off the ground on the ramps and the drive gearing selected for the transmission without load and given some gas to change gears. With the transmission and drive shafts looking OK, it could be stopped and lowered back to the floor. The car was then started up and driven out of the workshop ready to be loaded onto the truck to take her to a show.

The video can also be found on YouTube by clicking here,

First Public Showing:

With the best 2:30 sound track!

Enfield Pageant 21 – 23 May 2015 my car makes its first appearance to the public. The car still has no glass at this point so had to be covered at night and during any weather problems. The car starts fine from cold of course but needs a warm up for the transmission fluids too. This video has a nice extended soundtrack to hear the exhaust note on grass which tends to dull the sound a little. You can hear the difference when the car starts on the flat-bed and when it starts on the grass. If you look in the background you can see some people starting to gather around the car while Adam warms her up.

The video can also be found on YouTube by clicking here,

My main channel with all the videos so far can be found by clicking on the Logo below:

Share my Content

She’s Alive

What an epic day down at Mustang Maniac yesterday, I was so chuffed I can’t put it into words. OK, that’s not strictly true as I’m gonna tell you all about it. So I knew this weekend was going to be a day where it could be possible to start my car in theory. I was going try to start the wiring up again in order to turn her over on the key. Adam just looked at Yogi and laughed with “don’t worry about that, it will start!” Slightly confused, I sort of guessed what was going to happen when Yogi got out his little box of tricks and made up a lead while I fitted my Replica Autolite Group 24 Battery to the tray. They said that I would need some fuel for the car and I was packed off with an old school Jerry can and my wallet. I guess I had better get used to this filling the Muzzy up lark! I was given directions on how to get to the petrol station which was only a couple of miles away, it didn’t go in so I asked again, to which Yogi just laughed. So of I went, found it after over shooting the turning. Now I am not saying this place is old school, but there was a hut between two pumps and the sign said “Service fill only.” The bloke came out and got the diesel nozzle out, “No mate – fill this up unleaded” as I gave him the loaned Jerry can. With the can filled up and returned back to the yard, all without a SatNav. Yes, I admit it – I’m useless with directions, so much so that the very first thing my wife bought for me years ago when we got together was a TomTom. To which she said to me “Now I know you’re going get home,” Yep, she can have that one, as I have genuinely got lost going home before now. Anyway, we got a funnel in the filler pipe of my car and poured some fuel in. We sloshed it around a bit by rocking the car and then lifted the car back up in the air and drained it out into a clear container to check the fuel. It was fine, clear with no debris in there. The fuel poured back into the tank. At the front of the car Yogi had now created his “Hot Wire” scenario and was ready to turn the car over. Now I could tell you how to start a car bypassing all the electrics on the car, but I won’t for obvious reasons, but it’s clever. Adam and I joined Yogi and he done his thing, the car turned over for a while until Adam and Yogi where happy there was no bad news noises on turn over. This was a very wise check to make sure the crank was not going to shatter or valves dropped on pistons etc. Adam now under the car turned the engine over by hand with a large ratchet to line up the TDC on the timing mark. Yogi then set the distributor shaft itself to where it should be, based on experience at this point of course. He then set up the wires to produce a spark and Adam pumped a little fuel in the carb and Adam now got to the front and was ready to adjust the timing on the distributor, Yogi spun the car over. The car turned over for a few seconds, she coughed and spluttered and fired up after a few seconds. The timing was adjusted by Adam and they wedged opened the butterfly on the choke to slow the engine down. She lives! The engine was shut down after a minute or so and a blur of hands worked over the engine to adjust things and tighten things up. Like watching synchronised swimming, but this was two guys saying only a few words and flurry of well rehearsed activity. The movement stopped, and the car turned over and she started up pretty instantly. This time the engine was getting quitter and was smooth, but that was the exact opposite of what was going on at the exhaust end. The burble and noise from those Flowmasters was fantastic as I now stood at the back listening to duet of exhaust notes and thunderous air vibration. The unique tone of my car was now heard for the first time, trying to take in the sounds played around my ears was incredible. The throttle was now starting to be pulsed by the guys, the exhaust note changing rapidly into a throaty bark. The timing light was now out and some very fine tuning was coming into play. Yogi was tweaking the carb and Adam was checking the fluid levels and making sure there were no leaks. The engine now slowed to an unmistakable throb of the 289 v8. Three blokes looked well chuffed as John and Chris popped over to see the action. The engine now stopped and quiet except for the ticking of the cooling engine filled the air, all I couldn’t say anything. I was ecstatic that the car fired up one step closer to driving her, and relief that my and the guys hard work so far hadn’t gone to waste. The road test will need to be done obviously, but for now – I was a little gob smacked and overwhelmed with excitement a milestone had been reached. So far so good.

The fitting of the last part of the fuel line to the carb was the “banjo”, this turns the direction of the pipe ninety degrees and an adjustable to the main fuel line. Yogi had set up the rubber hose ready for the fitting of the part. The filter from the carb was fitted into the end of the banjo.

banjo fitting

with filter

The complete fitting was carefully lined up and tightened up to the carb, the angle of the pipe matched to the fuel hose. The hose was pushed on and tightened up.

filter and fitting

in place

fitting the fuel hose

Previously in the week the export brace had been fitted to the bulk head and the shock towers. Adam tells me that they used their custom-made conical fit bolts for the export brace, without having to file the holes square to make them fit. The bolts used are dome headed and stainless, not the nut and bolt of the original fitting and how they were then. These conical bolts fit into the standard holes and the tightening of the nut pulls the bolt into the brace tighter wedging them in so they don’t move. The result is pretty instant to look at and makes a big difference to the feel of the car. There is a common fault with fitting the export brace to a unstrengthened bulk head. The original export cars had a reinforced plate welded in place, this can be seen clearly on my car here too. The good news it that the brace fitted without need for cutting and adjusting to make it fit as some cars need. The reason is that those cars could have been in a little knock or “fender bender” and distorted the chassis. The work the guys had done on the jig was just perfect as always.

Export brace bolts

The guys left me to get on with the rest of the jobs under the hood, that was now to fit the wires to the oil sender, water temperature, electric choke and the ignition feeds to the coil, all can now be routed where I wanted them. But that was to be after a cup of tea, a few cakes and a bottle of chilled Dr Pepper. All these little jobs took longer than I thought they would, but who cares? My little lady is alive again and I still had that silly grin on my face. I have just got to say a big “Thanks” to Adam and Yogi for starting her up with me and showing me how to hot wire my car, just in case of emergencies of course. 😉

What an AMAZING day, thanks Mustang Maniac.

My car may well be at the Enfield Pageant of Motoring this coming weekend with Mustang Maniac’s other cars. It’s a great show so wander over and have a chat with guys. The details can be found at this link:

http://www.whitewebbsmuseum.co.uk/html/body_enfield_pageant.html

Share my Content

Making Headway

Looking forward to the long weekend as I could get to Mustang Maniac on Saturday and rest for a day on Sunday then do some homework which I had in mind on the bank holiday Monday. Saturday morning I loaded up the car and went to the garage to pick up my sockets and tools bag, I walked in picked up the stuff and put them in the boot and shut the garage door. Realising I forgot the ratchets I went to open the door Again. Locked. I searched my pocket, no keys. I went to the back of the car and checked the tool bag, no keys. I then had the cold sweat feeling, I put the keys on the service trolley in the garage. Now I always unlock the garage, lock it again and put the keys in my pocket. That way when I shut the door it’s already locked and so I don’t forget. Get the spare key, there is no spare key! When we bought the house there was only one key for the garage and I have been meaning to get one cut ever since for a number of years now should we say. At this point it’s dilemma time, do I try to get into the garage or leave it until Sunday? I decided to leave it, and went to say goodbye to the wife who could hear me havin’ my own little rant to myself out the front. She didn’t laugh (yet), but used some of the words that I was using previously to describe my stupidity back to me. Her stifled laughter didn’t last to long as I got in my car with the right hump. All sorts of things were running through my mind, locksmith? Replacement door? I just didn’t know what to think, all the way to the yard I was fretting and nothing on the radio calmed me down, cyclists two abreast down country lanes gave me the hump, getting stuck behind a bus down country lanes gave me the hump. Eventually I got to MM and bumped straight into Adam and Chris. I explained what I had done with my garage, they explained the best way to “re-gain entry” back into my garage when I got home. How do they know these things? Anyway, Sunday I tried their techniques to open the door. Now I needed a replacement part, I took the old one with me and took it to place I know who stock all that sort of stuff. Got home and replaced the handle and lock with a stronger quality one. All fixed again and now I have two keys.

Tip:

If you need another key, get one cut before it’s to late!

I unloaded half the tools I normally take to the yard and went to the workshop. Where Adam showed me the head liner that had been fitted. It looks great and gives it new lease of life. There were a couple of fold marks near the edges that would drop out shortly under the pressure of the headliner bows. I was well pleased and decided to go for a celebration Cherry Bakewell cake with the guys in the boys club.

Next was some exhaust work, as the parts had been sprayed last week and they were waiting for Yogi who didn’t get a chance to re-hang the exhaust as he was busy on other cars. So as I watched him last week I had a go myself, I soon realised it’s not as easy as he made it look. I eventually got it all back in place and aligned it up best I could get it. Just in case Yogi wanted to move bits I didn’t clamp it up hard, but just a tiny pinch to hold the brackets in place. There was not a lot of room to manoeuvre under there but it’s hanging in place and ready for Yogi to do his thing with the three-inch headers to the main pipes. I know they are not aligned up square and neat, but they will do just for now.

The next part was the carburettor fitting, I removed the old tape from the inlet port that kept the area clean. I rubbed the area down clean ready for the gaskets to be fitted back in place. John joined me and we worked out the sequence of gaskets to be fitted. The first gasket was to seal the intake to the carb spacer.

intake ports

First gasket

in place

Then comes the carb spacer, not essential but these give extra torque and power to the engine and make things run that much nicer. This spacer sits on top of the previous gasket.

The next part is the gasket for the bottom of the carb and then the car itself.

carb bottom

The sits on top and is bolted down for bolts each corner.

With the carb in place the throttle linkage was connected to the butterfly controls of the carb and the vacuum advance line. I’m not sure I like the pipe and may change that to look neater.

throttle link

vacuum line

Adam joined me late in the day we got to grips with the pipe work. We fitted up the new black silicon pipes with my new clamps which turned out to be a real pig to fit in position due to the bulk of the T-bar fittings at the top. We eventually got there but I needed to order two more clamps for the top hose. The clamps should have fitted, but they wouldn’t fit over the pipes and the ridge at the end of the water pump. I will order the next size up they should be with me by the time I get to MM next week.

heater hoses

top hose

Feeling a little worse for wear at 7.30pm we decided to call it a day. I had forgotten all about my locked up key, that was until I got on the dual carriageway, put the car in cruise control and reflected on the day, what a stupid boy I had been I thought to myself. OK I didn’t use those exact words but it sort of means the same thing.

My homework? Well that was to bring home a wheel and tyre from my collection. Adam tells me I had different steel wheels from different cars and only one of which was a Mustang wheel. The wheels were welded on some, riveted on others, different sizes and slightly different designs all that I hadn’t noticed. The only good bit about it all was that the Mustang wheel had the best tyre of the bunch on it. I will clean up the wheel and use that for my spare should I ever need it that is.