Tag: red oxide primer

Lots Of New Parts

I intended to post this last night as normal on a Sunday, but the time I got half way through it all it was getting late. So it has been delayed until today, but I think it will be worth the wait.

So the weekend just gone I knew what my tasks were going to be at Mustang Maniac, not cleaning up this time, but adding the last bits of pipe work and connections to the engine. I arrived and found Adam moving a load of new orders around in the offices and stock rooms where we discussed the plan of action for the day. I was given a collection of parts and made my way to the workshop.

bits

As I opened the door and found my new Magnum 500 wheels fitted with their tyres, one was already partly on the car, the guys thought that I would like to fit them on myself, which of course I did. The wheels were a special shipping order by Adam (as the last set were sold early last week), they arrived within the week ready to be fitted with tyres and balanced. All I can say is OMG they look awesome on the car. Thanks Adam for getting them so quickly. The protective paint over the white lettering will be left on for now until in the mean time of working on the car so they don’t get scuffed.

As I was looking under the car Adam arrived with even more parts which were going to be fitted. Adam showed me the exhaust pipes that Yogi had fabricated as a custom fit from the oversized headers. As the main pipes was slightly smaller than the three-inch header bores the step down was made to fit. As these headers sit low under the car, care was taken to clamp them up to give as much clearance as possible. At this point there is no H-pipe crossover as I wanted to hear what the engine note was like without it. This will be a mod that Yogi can do at a later date (but he don’t know it yet) if I don’t like it. Due to the larger exhaust pipes the standard hand brake lever will catch the pipes and so had to be modified to be out-of-the-way of the exhaust. Yogi worked his magic and redesigned the part which now has a gentle S-curve to it. You can just make it out after the white headers on the right hand side in these pics.

I was told to take my carb back off again as I hadn’t put the correct gaskets in place. Adam spotted it on my blog and thought I had the correct ones. The gaskets would have worked what I had on there, but not how it should have been and could have caused engine running issues or not as smooth as it should be. So here is the correct sequence with the 4v gaskets and not the open style that I had previously had a half and half mixture of.

intake ports
carb bottom

Yogi has also been busy fitting the transmission cooling lines to the radiator which are made of Copper-Nickel. They look like copper to start with but are much tougher, harder to bend and will dull down and weather to look like the stock steel pipes. The fittings at the radiator are unique to Mustang Maniac as they were designed by them and have them made in batches. These hand crafted pipes are designed to follow the original route at the front but take a more custom line due to the headers and the starter motor.

To get the starter motor in is a simple job, two bolts one top and one bottom, however, due to the space that is taken up by the headers this is no easy feat to achieve. In order to get the starter in place I had to remove the idle arm link and massage the transmission pipes out-of-the-way to fit it in place.

idle arm link in place
removed idle arm link

The transmission pipes will come up behind the starter and be joined by the starter motor power lead when that gets added next week. You can see the mounting hole for the starter and then it’s a case of wiggle it in place and get a bolt in. The starter is a heavy bit of metal and the ideal scenario is to get it fitted in quick as possible before your arms start to ache.

Starter motor space
starter in
clearance to pipes

With the starter in place it was back on with the suspension linkage. Now it was time to let the car back down again and work on the top of the engine. While I was under the engine I fitted the new oil filter ready to be filled up. Adam disappeared for a few minutes and turned back up with my rocker covers that I had been aching to fit. The black “289 Powered by Ford” set with their new gaskets. He laid them on my now ever decreasing parts boxes and said “I have been saving these for you.”

outside
inside

We removed the old rocker covers that were just resting in place, fitted the new gaskets to the new covers and started to fit the new covers in place.

fitting

With the left side bank cover going on we then added some quality oil into the car to allow it to settle down to a level while we work on other bits.

rockcov4

The transmission oil was added to the gearbox about half to start with then that was allowed to settle.

fluid3

While that was settling the front fan and power steering pump belts were added and tensioned correctly.

It got busy with the battery tray and drilled the back location hole and tightened it all up ready for the Autolite battery to be put in place week.

batTray

The PCV pipe was added to the right bank rocker cover and the carb spacer, brake booster pipe fitted to the back of the engine block, the ignition coil was added where I custom fitted the wires to fit their new location to look neat. Water was added to the radiator and the satisfactory gurgle and bubbling of the engine block was like a music to my ears. Just for now that is most of the pipe work and fluids added to the car. Of course the levels will be checked and topped up again after it has been fired up.

rockcov8

Yet again the day was a long one yet I didn’t notice as time flies when you’re having fun, which I certainly was.

Last weeks homework:

That was all about my old spare wheel. The wheel was filthy dirty and needed some work.

The wheel was given a proper clean inside and out to see what needed to be done in way of repairs. The result wasn’t to bad at all under the gunge. The rough bits of paint and rust were removed with wire wool and thoroughly degreased again.

The tyre was in pretty good shape and was masked up and given a couple of light layers of red oxide primer and allowed to dry in the sun. before adding the last coats of the full painted oxide.

light coats inside
light coats outside
fully coated inside
fully coated outside

The gloss black was applied after an hour or so once the red oxide had fully dried. This again was added in light layers and built up to give the final look.

gloss first coats inside
gloss first coat outside
final coats

The masking was removed and the white wall cleaned along with the rubber tyre. The final result is a good a new spare wheel which will go into the trunk later on.

inside

Another large post I know but we got so much done and I hope it was worth the wait.  Will we turn the key next week? I’m not so sure as there is a little more to be done on the wiring, connecting and tidying up etc and I have ordered a part for the carb to make the fuel line look neater. But it won’t be far away at all now. 🙂

Share my Content

New Paint Colour Revealed

The weekend still arrived slower than ever after a Bank Holiday at the beginning of the week. I was excited to get down to Mustang Maniac to see what had been done to my car. The lower cowl was going to be replaced as it had rotted through and that piece of work was known about. With the cowl off the guys could see the fire wall and the back of the dash clearly in daylight. On full inspection of the dash they could see it had gone a little thin underneath and rusted pretty badly all along the inside. A discussion was had to either replace the whole dash, or weld parts onto the old dash. This would mean shaping metal and replacing the radio slot that is always butchered on the classic cars. The decision was made to replace the complete dash, not a cheap option but it was going to be worth it in the long run. As ever Adam had a full dash in stock and was fitted, welded and brazed into place. It’s a little difficult to see black on the dark underside but you can make it out.

The top part of the firewall had to be fabricated as it was little thin in the top crease, so again it was decided by Terry to cut the top off the firewall and replace it with fresh metal and shape it to the new lower cowl. Metal work skills being displayed in all their glory and you can’t even tell it has been replaced.  With the lower cowl now firmly welded in place it was masked up and then given the first of a couple of layers of primer. It was at this point I was sent this teaser photo by Adam to show the primer had been applied to the cowl, this is the first piece of fresh metal to get proper paint.

lowercowlprime

I turned up very excited and itching to see the car expecting to see the cowl in primer. I wasn’t disappointed the lower cowl was painted in the colour that I wanted, Acapulco Blue. Obviously I am biased big time here, but it’s a bit different and a stock ’67 Mustang colour, I am absolutely delighted with it. This was the first time I had seen the colour on my car. A pretty special moment.

Acapulco blue
new dash and cowl

I got a bit carried away having a little bonding session with the fantastic paint job much to the amusement of the guys who followed me in to see my surprised look. Adam broke the news to me about the very busy day ahead of me. The trunk was to be removed and then strip it back to bare metal to see if there was any “little surprises” waiting for us as Adam puts it. What he means is, are there any pin holes or rust that have been covered up. I started on the top side and then worked my way to the underside. The underside took a lot longer due to all the corners and curves that made it hard work. I am pleased to say after a few hours hard work that the trunk is solid and no rust at all, except for a two very light surface areas where the paint had chipped off on the top side.

The next job was to red oxide the inside firewall as I had stripped it back to metal last week. The end results are pretty amazing I must say.

I was spoilt this week in my own little sanctuary, a nice guy Chris was given the dubious pleasure of working with me for the day. It’s normally quiet in the work shop, but last weekend it was a nice change to have somebody to share a conversation with all things cars. Chris made a great job of stripping the right side B pillar and the rear panel under the rear screen. Thanks for your hard work Chris. Throughout the day the normal visits from the guys was in full flow and towards the end of the day I was given some “homework” by Adam. That homework was to take home one of the fenders and strip it back to bare metal. Adam was right it was a busy weekend for me with a few more to come like it. Things have stepped up a notch, big time!

Sunday, I got up with a full day in front of me and the backs of my legs aching. My homework was to be completed along with the trunk hinges and sprung bars that connect them to hold the trunk open. The hinges were to be stripped and all paint removed as it has to be painted the same colour inside the trunk. I though I would try to be clever to strip and clean the parts with the sprung tension bars in place. Unfortunately this turned out to be a nightmare so I had to remove the bars.

I held one of the hinges in the vice and lever out the first bar. This was enough to start a cascade of events. The sprung bar unleashed itself like a coiled cobra and the end of the bar slapped me on the left hand at the base of the knuckle, the instant pain caused me to rub my hand as the other bar sprang away hit the man cave rubbish bin, this in turn was sent flying leaving a cloud of old sanding dust and rubbish all on the man cave floor in the doorway. After the initial clean up and the bruise on my thumb and wrist getting darker by the minute, I took the hinges back outside to complete the strip down. Both hinges came out pretty well and I was well pleased. To protect the inside of the hinges I gave a coating of Eastwood Rust Encapsulator to prevent additional rust on the inside of the hinges. The sprung bars were given an undercoat of red oxide and then a top layer of silver.

first hinge
before and after from each side
both cleaned
sprung bars
inside treated

The homework was a dilemma, how to remove the paint from the fender. I decided on my Dewalt dual action sander with a 100grit discs. I intended to go down to the undercoat and then use a lighter and lighter grades to get to the bare metal. Some of it went to plan and some of the paint came straight of and I went to the metal. I will have to fine buff the tiny swirl off the metal work now this weekend. The purpose of the homework? to see if there were any little surprises waiting for me. I am pleased to say I didn’t find any on this original panel so far. I still have the top edge to complete but that could be later in the week or next weekend.

right fender
starting the clean
holes for the emblems

A big update again and a lot has happened, I intended to post on Sunday as normal. But, I had so many pictures to edit it was very late to start writing this little lot up. Forgiven?

Quick Links:

Right fender work to treat the inside click here

Share my Content

Front End Fixes

The guys at Mustang Maniac have been busy welding up new plates to the inner wing and replacing the top cap plates to the fender from the cowl area. This little plate is quite a critical part of the car structure. To remove it without being on a jig will cause the car to bend at the firewall, in effect making the car sag in the middle. Although I had painted the areas and left the offending holes unpatched Yogi has taken a big chunk out and welded a completed new piece back in its place, just to be sure. The welding has been ground down and ready for more protective red oxide.

The steering linkages are the concentration this weekend as I am a little frustrated about having all the parts over my bench. Yes, I know I can move them, but it also prompts me to do something about it. So the plan was to remove the Gibbs Brand, not that you need to, but I Wanted to clean it up again to remove a few little pockets of grease I had missed around the valve mechanism. I applied the degreaser and with a clean white cloth to see where the dirt came from. Once I was happy with the parts being clean and dry I started the tedious masking up of the areas not to be painted. First of all was the rubber sections, and nothing else as everything was going to get a good coat of red oxide primer over it. I found that carrier bags on the larger parts inside the masking tape areas is a quick and easy way to protect the areas not to be painted. Only a small amount of tape is needed to hold it in place. I applied a blob of poster tack into the screw in sections to stop the paint getting in. Once it has been sprayed pull it out and throw it away.

The spraying of the red oxide primer was a little slow to dry due to the weather not being its best. But allowing coats to thoroughly dry before giving a second layer. I also sprayed the idler arm sections and the steel pipe from the valve as well at this point as they are quite small.

With the red oxide dried the next task was to mask up everything that was not going to be satin black painted. That was going to be the valve area and the main ram. To save the valve area complicated masking up I used a vinyl glove over the part and pulled it towards the accurate masking I had done earlier, to secure it in place was a simple wrap of tap around the wrist section. You only have to turn it inside out to re-use the glove with no wastage! The satin black paint dried a lot faster now as the sun was coming out and warmed the man up to an acceptable temperature.

The final part once the black had dried to was to reverse mask up ready for the silver spray. The smaller parts didn’t need to be masked again as they were going to be a single colour. Unfortunately the silver is taking hours and hours to try even though I used thin light sprays to build up the colour it is still a little tacky. I was hoping to add the pipe work to it today but the cool weather has put a stop to that. Rather than ruin the paint I decided to leave that till next week.

I would like to share a final photo of how I am supporting the ram and main steering bar while it all dries. Yep, I know it looks a bit naff, but it works.

steerpaint14

Review:

I have added a tool review for the Makita GA454530KD Angle Grinder here, or go to the Tools Review Menu and find it there. This was the replacement for my unbranded grinder that caught fire on me a few weeks ago. What do I think of it? Find out by reading the review. You can also click on the picture to go to the review!

makita2

Share my Content

To The Scrap Heap

Well it’s the second week in succession I haven’t managed to get to my car and it feels very strange now. But things have not been allowed to stand still at Mustang Maniac, the guys have been turning bits of my car into scrap! Of course I knew what they were going to do it and why. The left side rear quarter panel which was in the worst condition and the outer wheel arch have been cut away to leave an exposed rear chassis. The full quarters have to be unleaded from the rear roof supports. Once that is done then the “B” pillar posts spot welds are drilled out along with the spots for the outer wheel arch. The panels were cut away in small easier to manage sections and thrown unceremoniously into the scrap bin.

leftrearquarterscrap
Considering these were the original quarters then it’s hardly surprising they have gone rotten in the usual place around the arch itself.

LeftRearArchRust
To remove the quarters correctly the car should be bolted to a proper jig to stop any movement, if anybody offers to do it without a jig beware! The panel was removed then the outer wheel arch.

The lead has to be removed, cleaned up, preped ready for the full quarter to be re-fitted. In these pics you will see the lead being worked by Yogi.

I replaced the hinge pins a while ago (click here for the link) so there is no movement on the doors which is always a good idea when doing this type of work in order to avoid the door dropping on the hinge. You will also notice that the doors are still in place for a good reason, with the rear quarter removed from the car, the door is now the only constant to work from at this point, you will need as little movement as possible, hence the hinge pin replacement I completed a while ago because I knew this work was coming up. The full replacement quarter panel would need to do the same obviously but in reverse, matching up to the door now. Any misaligned panels at the rear will be multiplied considerably due to the length of the door and the fenders themselves. By the time you get to the stone bumper guard and the bumper itself, depending how bad the misalignment is, it could be enough to stop the panels being bolted back together again. The very common mistake is to take everything of the car and then weld the quarters on. The panel alignment should always be worked from the back going forward, the fenders and hood will have to line up correctly with the doors and hence the rear quarters. This is a very timely and tedious but critical part of the process, get it wrong and the car will look very odd. Or even worse, if this type of work is done without a purpose-built jig, beware!
Once the arch and the quarter were out-of-the-way, the old rotten section of the chassis rear left leg was to be cut away at the point where there is plenty of good metal.

A butt weld is not acceptable due to the stress on this part of the chassis so the guys make up a heavy plate which is to fit inside the original chassis leg and the new section of replaced chassis. The new section of rail was welded to the plate and the joint welded together to give the support for the welds and new rear rail.

With the chassis rail now in place the trunk cover panel section was placed over the rail and welded into place to offer more support and look a lot nicer in the trunk area.

I dare say I will have more red oxide painting to do when I am down at Mustang Maniac again to match it all up.

Share my Content

A Spot Of Welding

Weekend came and I was ready to go on Friday night, the bag was packed with a change of clothes and my new angle grinder ready to rock. Saturday morning and with Mustang Maniac just over the hour away, the aircon was on, the shades were on and I was on my way. The trip was peaceful for a change and I seemed to go all the way there without stopping.  I got out the car and the heat was getting hotter. Adam was being escorted by a couple of his dogs as usual, no sooner had he opened up the steady stream of customers arrived. I saw myself to my car and got straight to work. Yogi (Al) had been busy again welding up the last parts of the underside and the front right shock tower. He had again done some nice welding with the spot welds that I decided to keep them. The top of the shock tower needs to be flat ready for the export brace to be fitted so they were ground down, a little filler applied and painted.

welds ground down
cleaned up and red oxide
New spots
cleaned up and painted

The underside had been exposed since the day I removed everything I could of the under seal. There was a little surface rust still and the odd bit of under seal. I started rubbing down with the angle grinder and wire wheel to nice a bare metal ready for the red oxide primer.

Before final Clean up
cleaned up

This last little section was taking a lot longer due to the complex shapes for the rear shocks and suspension mounts. The tufts of wire wool ( if that is the technical term for it) was difficult to work with, trying to get in all the corners that the grinder wouldn’t fit. The manual work had made my fingers and wrists ache. But it was worth it. This time I took a part way picture.

rearoxide3

With all the red oxide primer done for now the difference is amazing. I finished at the point where some of the thin metal will be removed and replaced at a later date. You will notice a couple of little spots haven’t been painted as they need a couple of spot welds. With a little luck and man power available, the car should be taken off the spit and clamped on the jig getting ready for some upper body work. Then I suspect there will be more under body painting before she goes to the proper paint shop.

Sunday was a day tidying up in the man cave, the localised tornado that hit my shed on Saturday while I was out just happened to have the same name as my wife! I also cleaned a little more on the steering rack, and the photos looked no different to the previous pictures unfortunately. So I didn’t post those ones for wanting to look like duplicates.

I am planning on doing a review of my new Makita GA4530KD if anybody is interested.

 

Share my Content

Deleted!

You know the scenario by now, I go to Mustang Maniac for the day and work my arms off. (Yes, I did say arms, for those that think I may have said something different). It was raining and chucking it down and not the best of days to travel. Yet as I was getting close and closer to my own little paradise the sun was getting brighter. When I pulled up – full sun, what more can a man ask for? I was greeted by Adam who was just coming out of the refurbished workshop. I was given the tour of the new interior and it looks so much better and dare I say it – organised. The new racks, shelving, and inner panels made it look so much bigger. I was shown a few of the cars they had been working on as we walked to my car. I was shown what was needed to be done this weekend, the other side of engine bay and the inner fender all in red oxide. We rolled the car over and I got to work. I am getting quicker at this angle grinder clean up now and the amount of work to be done today was more than last week. Clean till it gleams, rub down and paint. Adam had removed the original welded shock tower bracket for me along with the botch job of a hand brake cable bracket in the tunnel, the bracket was only held in place by pop rivets. So I have pinched a few pics from Adam where he had done the work.

pilot holes
weakening the spot welds
the neat holes
bracket being drilled
original hole

The normal process is that I take the photo’s of the before, during and after of what ever I get up too. I get home and upload the pics to the PC and crop them and upload ready for the blog. In a moment of madness I clicked on “Delete” option instead of copy from the SD card. As the SD card has no recycle bin they were gone simple as that. Yes I have some special recover tools but it’s not worth the time and effort to retrieve them. However, the were a few choice words uttered under the breath, over the breath and out load. I was not a happy bunny at this point. The only good thing is that the batch of pics I deleted were the after pics of the red oxide and a couple during. I will be able to get some more when I am down there next week, so it’s not a problem just more annoying than anything as I can’t show you the results of hard days labour. I will load the new pics next week with the next post. Am I the only plum to do the delete thing?

Sunday I have started on project which one of the bigger ones, the steering section. I have started to clean it up and remove the tie rods and idler arm. I have started to clean up the valve end as that was really greased up bad. The pipe fittings were only finger tight which might explain the state it’s in. I will create a Steering Rack page this week with any luck and the step by step process.

finger tight fittings
tie rod

The idler arm has been completed today but it was seized up big time. A little Gibbs brand sorted that out though and was able to get it out, with the help of a brass hammer of course. The colour of the rust was so bright it almost looked like it had been heated up and was glowing orange.

Thanks Adam for letting use some more of your pics. 🙂

 

Share my Content

Seeing Red

Every four years my life is made a misery so I am going to drop the “F” word – Football, there I have said it. All around the world people are going mad, they take days off work to watch football, they attach things to their cars like cheap plastic flags or vinyl stickers of their world cup team. People have football match parties, the television is infested with it, newspapers are riddled with it and the radio is full of it. So you may or may not have noticed that I don’t like football, I don’t want to see football, I don’t want to play football and I don’t want anything to do with football. Now I do appreciate that football is a passion, it’s even patriotic and this particular event thankfully only happens every four years. But, for people like me it’s horrendous, I just can’t get away from it, it does my head in. There should be a least a couple of channels on the television that are football free, not on the news, not in adverts, nowhere, nothing, zilch. My Bluray collection is getting a few re-runs that’s all I can say. Like all things, there is a silver lining to this very dark cloud that hangs over me, I can go out when football is on and I can park in a super market that is now occupied mainly by ladies getting away from the football I guess. I get funny looks as if to say, does he know the football is on? The roads are quiet, restaurants are not very busy, but the pubs are full. Before every man threatens to unfollow my blog and the ladies get the hump because I suggest they don’t like it, I just want to say; please spare a thought for the people who don’t like it. However, I wish all your football teams the best of luck. Does the fact that I am a male and I don’t like football make me weird? Come to think of it, don’t answer that!!

It’s Sunday night and I am writing up my blog, what happened to Saturday and today? Saturday I went to Mustang Maniac to do some more work on my car. Their yard has been cleaned up and looks a lot better and that was the general opinion of the few people I was talking to there as well. I can say that my car is starting to progress a little. The welding is still to be done when they get some time. In the mean time Adam told me to I could clean up the panels on one side de-grease them and get some red oxide paint on there. The trick is to stipple it on, the stuff does not want to be painted on and looks odd if you do. I have done a few bits and it looks so much better. The rear right side wheel arch has been half done as we may need to replace the outer arch but we need to get the quarter panel off to check. The painting took me ages to do and was strangely therapeutic! I could even see the red changing colour as it dried. So I really did watch red (well sort of dirty orange in fact) paint dry! Next week I suspect I will do the other side.

Sunday I went to put stuff in the man cave and it was a real mess. As it (football), was on I decided to tidy it up. Now I can get in there and even have more storage space. Well, that is until the wife puts some more gardening stuff in there!

Share my Content

The Bits I Missed

A couple of weekends have gone by where I have not worked on my car. So much so that I have had comments like “Are you feeling OK” or “Are you getting withdrawal symptoms?” Last weekend was the Enfield Pageant where I took some photos on a previous post, the week before it was a logistical car issue I couldn’t get down there. Anyway, over the weekend I went down to see the guys at Mustang Maniac and got some cleaning up work done on the underside and some more on the tunnel area. In other words, the bits I missed that needed the clean up weren’t worth taking a picture of as it wasn’t to exciting to look at, just sheets of metal with a little rusty paint in the corner. Not boring from my point of view of course, but from a photo and a post point of view it could be. Now the panels are clean enough, they are now at an acceptable standard to Adam to move on to the next stage. We are hoping to take the car of the spit and put her on the jig next week to start on some of the removal of the bad bits of chassis and adding the good bits. But, things can change quite quickly so I will have to wait and see. I will definitely post some pictures on here when that all happens. This could be an exciting stage of the project if all goes to plan.

Yesterday I started a clean-up of the hand brake, parking brake, emergency brake or secondary brake depending who you talk to. It wasn’t too bad to look at but I managed to free it up a while ago. So while the car is in bits – all the way down to the nuts and bolts, I decided to refurbish it properly. Same ol’ story of paint stripper, de-rust, mask up and spray. I stripped the whole thing down by removing the pin and retaining clip, remove the wire it’s pretty much there.

 

before the clean up

The only part I have to think about was the mini fire that had melted the back of the handle. I used progressively finer grades of sand paper to get it smooth again. I can’t go to far otherwise it will get thin and crack. But, it has all come up pretty well and will look good under the dash now.

All I need to do is work out the colour for the lettering of the lever. Red, white or leave it black. Any ideas for the colour? I shall reassemble this and post a pic of the final version next week.

I need to make an apology now as I had been told that the link to the Batmobile article wasn’t working. So I have re-done it with a couple of extra facts and dimensions about the car. It should be fine now, I think. Let me know if there are any more issues with it again.

1966 Batmobile

Quick Links:

Articles – Original Batmobile 1966 or click here.

Photo Menu – Inside The Car Hand Brake Refurbishment or click here

Share my Content